[TRNSYS-users] change wall properties in trnedit

[David BRADLEY]

Salma,

   TRNEdit is really just a text editor that has some special features 
to make editing *.dck and *.trd files a bit easier. You can modify the 
thickness of layers in your *.b18 file using a text editor. There isn't 
any real reason to use TRNEdit; you can use notepad or a different text 
editor.

   If you are asking how to put different layer thicknesses into a 
TRNEdit table so that you can run a parametric study then I am afraid 
that there isn't a way to do that automatically. Your best course of 
action would be to create a *.b18 file that corresponds to each run you 
want to do in your parametric study and then to create an ASSIGN 
statement in the dck for each *.b18. You'll then make the Type56 *.b18 
logical unit number parameter into a variable name that is set in the 
TRNEdit table.

kind regards,

  David


On 02/20/2020 08:24, SALMA LAHMAR via TRNSYS-users wrote:
> Hi everyone,
> How can I change the wall properties(  thickness of layers)   of my 
> Trnbuild project in trnedit.
>
> Thank you in advance
> ᐧ
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200220/75f50890/attachment.html>