[TRNSYS-users] Radiators with type 56

[mohamed sarmouk]

Thank you

Le ven. 14 févr. 2020 à 2:41 AM, "최영배" via TRNSYS-users <
trnsys-users at lists.onebuilding.org> a écrit :

>
>  Hello
>
>
>  If you want to input the radiator to your building, there are several
> ways to try that.
>
>
>  1. you can apply a radiator model using Type 1231.
>
>
>  2. you can put "gain" in type 56. This requires a calculation of the heat
> generation.
>
>
>  3. Simply assume that the amount of heat in the interior wall.
>
>
>  Regards
>
> --------- 원본 메일 ---------
>
> *보낸사람* : mohamed sarmouk via TRNSYS-use <
> trnsys-users at lists.onebuilding.org>
> *받는사람* : TRNSYS users mailing list at O <
> trnsys-users at lists.onebuilding.org>
> *참조* : mohamed sarmouk <sarmouk at gmail.com>
> *받은날짜* : 2020-02-13 (목) 23:01:42
> *제목* : [TRNSYS-users] Radiators with type 56
> Hello,
> I want to use radiators to heat my building, i already designed the
> thermal zones on sketchup Trnsys 3d, then in simulation studio, i did not
> know how to link radiators to the type 56 building.
>
> Would you please informe me how to do that,
> Thank you.
>
> M.SARMOUK
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200214/2f94739e/attachment.html>