[TRNSYS-users] Slow simulation

[Jeff Thornton]

Erik,

Did you turn on debug mode in the control cards and see where the simulation is spending all of its time?  You’ll be able to see by unit number and by type number the amount of time spent in each model.

Jeff - TESS

> On Apr 26, 2020, at 7:50 AM, Erik Eriksson via TRNSYS-users <trnsys-users at lists.onebuilding.org> wrote:
> 
> 
> Hi all,
>  
> When I simulate my solar hot water system the simulation is extremly slow. I have a quite large system. I have tried to decrease the nodes in the tank and so on but nothing seems to makes it go faster. There are no errors and few warnings.
>  
> I was thinking if it is the computer that is slow. It is a laptop that im using that has a AMD RYZEN 7 processor. When I look at the cpu the computer only using about 20-25% when it simulating. And if I try to simulate more systems at once the cpu is more or less a multiple, so three simulations at once using about 60 % of the cpu. So what is the limitation of the computer prestanda when simulating?
>  
> //Erik
>  
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200426/6dbd117d/attachment.html>