[TRNSYS-users] Boundary temperatures settings

[Jeff Thornton]

It's usually an input to the building model or it's set inside of the
building by viewing the wall in question. 

Jeff 

---
Jeff Thornton
President - TESS LLC
3 N. Pinckney Street, Suite 202, Madison WI USA 53703
Office: (608) 274-2577 Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton at tess-inc.com

On 04/20/2020 4:12 am, Alexander Schneider via TRNSYS-users wrote: 

> Hallo, 
> 
> I created a new 3D multizone Building project. There are this settings at the beginning where you can upload the idf file and weather data. Also it is possible there to define the boundary temparature. After I worked on the Project I would like to change the boundary temperature, how can I do it afterwards after I worked on the Project. I can not find this setting. I am also sending you a picture to describe what I mean. 
> 
> I hope you can help me. 
> 
> Best regards 
> 
> Alexander Schneider 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [1]
 

Links:
------
[1]
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200420/6cc09ae9/attachment.html>