[TRNSYS-users] 回复: how to find the source of the error ?

[David BRADLEY]

Fu,

  Unfortunately as far as I am aware, there is not a very easy way of 
searching for the location of a component in a project from the Studio 
interface.

kind regards,

  David


On 10/29/2019 13:36, Fu Yiwei wrote:
>
> So if I got 200 components in my model, could I search by name or Unit 
> number in my model instead of looking for manually?
>
> 发送自Windows 10 版邮件 
> <https://go.microsoft.com/fwlink/?LinkId=550986>应用
>
> ------------------------------------------------------------------------
> *发件人:* David BRADLEY <d.bradley at tess-inc.com>
> *发送时间:* Wednesday, October 30, 2019 2:13:18 AM
> *收件人:* TRNSYS users mailing list at OneBuilding.org 
> <trnsys-users at lists.onebuilding.org>
> *抄送:* Fu Yiwei <fuyiwei691 at outlook.com>
> *主题:* Re: [TRNSYS-users] how to find the source of the error ?
>
> Fu,
>
>  Most errors will be associated with a Unit and Type number, both of 
> which will be shown in the error log. When you return to the Assembly 
> Panel in the Studio and press the F2 key, the names of the components 
> will toggle to show each component's Unit and Type number. There are 
> some error messages that are not associated with a Unit and Type 
> number, in which case "0" is displayed. In the case of the error you 
> received, the input file is being checked to make sure that all the 
> referenced external files files exist. Unfortunately, this check is 
> done globally, not on a component by component basis so while the 
> message is associated with a particular Unit and Type, the routine 
> that is checking does not actually know (yet) what Unit and Type is 
> associated with each file.
>
> kind regards,
>
>  David
>
>
>
> On 10/29/2019 12:28, Fu Yiwei via TRNSYS-users wrote:
>>
>> I am using TRNSYS 18, if I set the external file of the component 
>> “Weather” as empty, TRNSYS would give me an error message.
>>
>> But I am wondering what is the meaning of this message, I can’t see 
>> the connections.
>>
>> How should I locate the source of the error based on the messages?
>>
>> 发送自Windows 10 版邮件 
>> <https://go.microsoft.com/fwlink/?LinkId=550986>应用
>>
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at lists.onebuilding.org  <mailto:TRNSYS-users at lists.onebuilding.org>
>> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
> -- 
> ***************************
> David BRADLEY
> Principal
> Thermal Energy Systems Specialists, LLC
> 3 North Pinckney Street - suite 202
> Madison, WI  53703 USA
>
> P:+1.608.274.2577
> F:+1.608.278.1475
> d.bradley at tess-inc.com  <mailto:d.bradley at tess-inc.com>
>
> http://www.tess-inc.com
> http://www.trnsys.com

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20191029/774116a4/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 5AE7742A0E60487198676078C902E574.jpg
Type: image/jpeg
Size: 114840 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20191029/774116a4/attachment-0001.jpg>