[TRNSYS-users] Steam ejector

[David BRADLEY]

Valeria,

   I have not come across a steam ejector model but the device does not 
seem to be all that complex. I suspect that a model could be written. 
Could you give me a bit more information about what you are trying to 
model? For instance, do you also need to model the vacuum chamber? Do 
you just care about the conditions of the steam that would come out of 
the ejector? Is the vacuum pumped continuously by the ejector or is the 
ejector only used periodically?

kind regards,

  David


On 10/21/2019 06:18, Valeria Badalamenti via TRNSYS-users wrote:
> Hi,
> i need to model a steam ejector to suction air and make vacuum.
> Is there a type? which types can i use to simulate this object?
> thanks,
> Valeria
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20191022/7738203e/attachment.html>