[TRNSYS-users] TRNSYS control cards

[Jeff Thornton]

Makram,

You can use equations to set the control card variables.  For example:

STARTSIM= 0
DAYS= 57
STOPSIM= STARTSIM+DAYS*24

Then use these names in the appropriate spots in the control cards.  The only caveat is that they can’t change during the simulation.

Jeff / TESS

Sent from my iPhone

> On Jan 9, 2019, at 2:39 AM, Makram ABDELLATIF via TRNSYS-users <trnsys-users at lists.onebuilding.org> wrote:
> 
> Hello everyone,
>  
> Is there a way to change control cards automatically?
> For example, by creating a parametr (or equation) or by calling a variable from an external txt file.
> Thank you.
>  
> Best Regards,
> Makram ABDELLATIF
> PhD student
> <image001.png>
> Makram ABDELLATIF
> PhD student
> Civil and Mechanical Construction Department
> HEI, a school of Yncréa Hauts-de-France
> Laboratory Civil Engineering and géo-Environment
> makram.abdellatif at yncrea.fr  
> Tél. : 07.54.15.03.53
>  
> www.hei.fr / www.yncrea.fr
> www.lgcge.fr
>  
>  
> <image002.jpg>
>  
>  
>  
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190109/9fc39712/attachment.html>