[TRNSYS-users] Fwd: Multizone coupling

hotline hotline at Transsolar.com
Thu Feb 14 02:16:47 PST 2019


Michele,

You should move both airnodes to one Zone.


  *   Open the zone with the airnode you want to move
  *   Move active airnode to your target zone
  *   Now you have one zone with several airnodes

To define an airflow between these two zones, you can use Couple (05-Multizone docu)

[cid:image001.png at 01D4C456.C4B16A60]

Best,
Christoph

Von: TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> Im Auftrag von Michele Vella via TRNSYS-users
Gesendet: Mittwoch, 13. Februar 2019 12:15
An: trnsys-users at lists.onebuilding.org
Cc: Michele Vella <michele.vella.15 at um.edu.mt>
Betreff: [TRNSYS-users] Fwd: Multizone coupling


I have 2 zones on top each other but there is no ceiling touching them so i did the 2 touching surfaces as virtual surfaces.The problem is I dont know how to couple them together as when i heat the upper zone it is not effecting the temperature of the lower zone. When i press couple on the TRN build it just shows up the airnode window.

Regards
Michele Vella
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190214/0dc35cfb/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 47790 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190214/0dc35cfb/attachment-0001.png>


More information about the TRNSYS-users mailing list