[TRNSYS-users] How to conduct parametric analysis in TRNSYS

[SALMA LAHMAR]

Thanks a lot!

Le mar. 10 déc. 2019 à 19:13, David BRADLEY <d.bradley at tess-inc.com> a
écrit :

> Salma,
>
>  There are (as usual) a number of different ways of having all the results
> from a parametric run put into the same output file. One way is to use a
> Type25 printer as an output device in your simulation and to set it to
> "append" mode instead of "overwrite mode." The mode is controlled by a
> parameter.  The other thing you'll need to do is to make sure that the name
> of the output file is NOT the same as the name of your input file,
> otherwise there will be one output file produced per table run. Note that a
> number of the standard printer output components in TRNSYS allow the switch
> between append and overwrite mode.
>
> kind regards,
>
>  David
>
>
> On 12/08/2019 07:33, SALMA LAHMAR via TRNSYS-users wrote:
>
> I have to  run a lot of simulations to calculate the building energy
> consumption depending on the value of different parameters.
> I tried to use trnedit to make a table but I don't know how to have a
> result of all simulation in one output file like : \Examples\Parametric
> Runs\SDHW-ParametricRuns in trnsys.
> thanks in advance
> ᐧ
>
> _______________________________________________
> TRNSYS-users mailing listTRNSYS-users at lists.onebuilding.orghttp://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
> --
> ***************************
> David BRADLEY
> Principal
> Thermal Energy Systems Specialists, LLC
> 3 North Pinckney Street - suite 202
> Madison, WI  53703 USA
>
> P:+1.608.274.2577
> F:+1.608.278.1475d.bradley at tess-inc.com
> http://www.tess-inc.comhttp://www.trnsys.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20191210/434e6949/attachment.html>