[TRNSYS-users] Window importation failure

[David BRADLEY]

Susana,

   The steps that you describe are the correct ones and I just made a 
very simple example to make sure that there is not a fundamental problem 
with importing adjacent windows.


   There is a maximum number of surfaces allowed in a model so it is 
possible that may be the problem. I have also had models that just 
turned sour on me and I have found in some cases that I just had to 
delete the windows (or walls) that were not importing correctly and then 
redraw them.


   If none of those ideas solves the problem then you should send the 
*.idf and *.b18 into your distributor to see if they can offer some help.

kind regards,

  David



On 08/03/2019 10:50, SUSANA LAGE CAL via TRNSYS-users wrote:
> Dear everybody
>
> I am in the process of calculating the energy demand of a building, by 
> employing *type 56.*
> *
> *
> Internal windows and glass doors are relevant in my house´s adaptative 
> thermal behaviour. That is why I have included both of them in  Google 
> Sketchup - Plugin TRNSYS 3D drawing.
>
> But, unfortunately, once the *idf *file is imported, I open *Trnbuild 
> *to edit the building and I find that *most of internal windows and 
> also some of the external ones do not show up at the correspondent 
> thermal zones*.
>
> Adjacencies have been thorougly checked and the *dck* file has also 
> been properly set. The simulation works OK and I have been able to get 
> some results. All the windows are light blue in the Sketchup-Plugin 
> Trnsys 3D file. And the internal ones have been drawn simetrically in 
> both adjacent thermal zones.
>
> ¿Could you please give any useful tip to solve my problem? ¿Is there 
> perhaps a maximum number of windows and I am surpassing it?
>
> Best regards
>
>
>
> *SUSANA LAGE CAL*
>
> Departamento de Energía _UNIOVI_
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190812/56e2691e/attachment-0001.html>