[TRNSYS-users] Cooling values not making sens

[David BRADLEY]

Michele,

  I would suggest you send your question and your project to your TRNSYS 
distributor. It isn't really possible to determine the cause of the 
problem without looking at the project files. If you aren't sure who 
your TRNSYS distributor is, please send me a direct email and I can help 
you find the appropriate contact person.

kind regards,

  David


On 04/16/2019 12:43, Michele Vella via TRNSYS-users wrote:
> I'm trying to cool an air node by using the schedule and it is made 
> sure that it gives a value of 1. The set temperature is 25 degrees and 
> simulation is run in summer, but the temperatures are falling down to 
> 0 degrees Celcius. I'm trying to find the sensible cooling demand.
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190416/94b1bdab/attachment-0001.html>