[TRNSYS-users] [help] problem with type 534

[Jeff Thornton]

Input 2 is the inlet flow rate to the first port.  The error is indicating that the flow rate is less than zero.

Jeff - TESS

Sent from my iPhone

> On Apr 1, 2019, at 10:27 AM, BARCELLINI Pierre via TRNSYS-users <trnsys-users at lists.onebuilding.org> wrote:
> 
> Hello,
> I’ve got some trouble with the type534, an error message occurs at timestep 0.125h and say :
>  
> “
> TRNSYS Message 103 : The TRNSYS TYPE checking routine has found an inconsistency in the specified component between the input file and the information expected by the Type
> Reported information : An illegal INPU value has been reported by the model. The model has reported that input 2 is the problem – but this may not be the case. Please check the component configuration. The *.lst file may contain additional information
> “
>  
> I’ve already take a look at the TRNSYS forum, and I saw that many people have the same problem, but the solution seems to never be the same. I’ve check the Type 534’s parameter a lot of time but nothing seems to be wrong.
>  
> Attached to this e-mail, you’ll find the .tpf file with the external file of Type 534. Sorry because the .tpf is a little bit messy.
>  
> Kind regards,
> Pierre BARCELLINI | Chargé d’études
> 
> ----------------------------------------------
> www.etamine.coop
> 83-85 boulevard Vincent Auriol – 75013 Paris
> std : 09 54 37 51 54
> pierre.barcellini at etamine.coop
> ----------------------------------------------
>  
> <Assistant.tpf>
> <Example_534.dat>
> <besoin_trigone.txt>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190402/3ec0c391/attachment.html>