[TRNSYS-users] Forcing Function with more than 100 points

[Yuichi Yasuda]

Gokula,

While holding down the shift key, click parameters 3 and 4 to select.
Then, you will be able to click the Change button.

Best,
Yuichi

On 2019/04/02 10:45, SENTHIL KUMAR, gokula [Student] via TRNSYS-users wrote:
>
> Hello David
>
>
> Thank you for your answer, but I have got a problem in the procedures 
> which you mentioned.  I followed that up to the 'parameters' tab (To 
> change the limit open the base proforma in the direct access tool by 
> double clicking it. Switch to the "variables" tab and click the 
> parameter/input/output button. Switch to the "parameters" tab) but in 
> that it does not show any option to change the number of points of the 
> schedule. Please see the below given image.
>
>
> Best Regards
>
> Gokula
>
>
>
>
>
>
> ------------------------------------------------------------------------
> *From:* David BRADLEY <d.bradley at tess-inc.com>
> *Sent:* Monday, April 1, 2019 11:18 PM
> *To:* TRNSYS users mailing list at OneBuilding.org
> *Cc:* SENTHIL KUMAR, gokula [Student]
> *Subject:* Re: [TRNSYS-users] Forcing Function with more than 100 points
>
> Gokula,
>
>  The limit is one placed (somewhat arbitrarily) on the proforma. To 
> change the limit open the base proforma in the direct access tool by 
> double clicking it. Switch to the "variables" tab and click the 
> parameter/input/output button. Switch to the "parameters" tab, select 
> the cycled parameters and click on the "change cycle" button. At the 
> bottom of the window, you'll see the min and max. Change the max value 
> to whatever you want and save the proforma. The final step is to 
> replace the existing proforma in your project. You can of course 
> delete and readd the proforma but you can also right click on the 
> existing proforma and select "replace" from the context menu then 
> browse to find the proforma that you modified.
>
> kind regards,
>
>  David
>
>
> On 03/25/2019 01:15, SENTHIL KUMAR, gokula [Student] via TRNSYS-users 
> wrote:
>>
>> Hello Trnsys User
>>
>>
>> I need a 10 minute daily profile. I tried to do that with forcing 
>> functions and calculated that my profile requires minimum 146 points. 
>> But the maximum limit of the forcing function (Type 14h) in trnsys is 
>> 100 points. Please help me how to increase the limit of forcing 
>> function or suggest me any other possible way to do that (Except: 
>> Data reader).
>>
>>
>> Thanks !
>>
>>
>> Best Regards
>>
>> Gokula
>>
>>
>> Gokula Manikandan Senthil Kumar
>>
>> PhD Student
>>
>> Department of Building Service Engineering
>>
>> Hong Kong Polytechnic University
>>
>>
>>
>> /Disclaimer:/
>>
>> /This message (including any attachments) contains confidential 
>> information intended for a specific individual and purpose. If you 
>> are not the intended recipient, you should delete this message and 
>> notify the sender and The Hong Kong Polytechnic University (the 
>> University) immediately. Any disclosure, copying, or distribution of 
>> this message, or the taking of any action based on it, is strictly 
>> prohibited and may be unlawful./
>>
>> /The University specifically denies any responsibility for the 
>> accuracy or quality of information obtained through University E-mail 
>> Facilities. Any views and opinions expressed are only those of the 
>> author(s) and do not necessarily represent those of the University 
>> and the University accepts no liability whatsoever for any losses or 
>> damages incurred or caused to any party as a result of the use of 
>> such information./
>>
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at lists.onebuilding.org  <mailto:TRNSYS-users at lists.onebuilding.org>
>> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
> -- 
> ***************************
> David BRADLEY
> Principal
> Thermal Energy Systems Specialists, LLC
> 3 North Pinckney Street - suite 202
> Madison, WI  53703 USA
>
> P:+1.608.274.2577
> F:+1.608.278.1475
> d.bradley at tess-inc.com  <mailto:d.bradley at tess-inc.com>
>
> http://www.tess-inc.com
> http://www.trnsys.com
>
>
> /Disclaimer:/
>
> /This message (including any attachments) contains confidential 
> information intended for a specific individual and purpose. If you are 
> not the intended recipient, you should delete this message and notify 
> the sender and The Hong Kong Polytechnic University (the University) 
> immediately. Any disclosure, copying, or distribution of this message, 
> or the taking of any action based on it, is strictly prohibited and 
> may be unlawful./
>
> /The University specifically denies any responsibility for the 
> accuracy or quality of information obtained through University E-mail 
> Facilities. Any views and opinions expressed are only those of the 
> author(s) and do not necessarily represent those of the University and 
> the University accepts no liability whatsoever for any losses or 
> damages incurred or caused to any party as a result of the use of such 
> information./
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org


-- 

安田　雄市 Yuichi Yasuda
株式会社クアトロ quattro corporate design co.,ltd
http://qcd.co.jp/
Tel:+81(0)3 5768 6744 Fax:+81(0)3 5768 6745
e-mail: yasuda at qcd.co.jp

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190402/349b4f73/attachment.html>