[TRNSYS-users] Creating a model for domestic hot water system

[David BRADLEY]

Tatiana,

   I think in that case that the libraries are installed correctly but 
that you have the 32-bit version. The 64-bit version is available for no 
charge from your distributor.

kind regards,

  David


On 09/27/2018 07:45, Tatiana Mahavita wrote:
>
> Hi,
>
> Thank you so much foryour help. I will use type 751 then. I checked 
> the ..\Trnsys18\UserLib\ReleaseDLLs\ directory and I found 20 DLLs for 
> the TESS Libraries there, but the files were named like 
> TESSUtilityLibrary_v17.2.01_Release.dll for example, so I did not see 
> « 64 » anywhere for the TESS Libraries. I will contact my distributor 
> as you told me.  Thank you again for advising me.
>
> Best regards,
>
> Tatiana
>
> *De :*David BRADLEY [mailto:d.bradley at tess-inc.com]
> *Envoyé :* jeudi 27 septembre 2018 13:45
> *À :* TRNSYS users mailing list at OneBuilding.org
> *Cc :* Tatiana Mahavita
> *Objet :* Re: [TRNSYS-users] Creating a model for domestic hot water 
> system
>
> Tatiana,
>
>   I would suggest using Type751. The error that you are getting 
> suggests that the TESS Libs are not installed or perhaps that you have 
> the 32-bit version of the TESS Libs installed in your 64-bit version 
> of Trnsys. Check in the ..\Trnsys18\UserLib\ReleaseDLLs\ directory and 
> see if you can find the DLLs for the TESS Libraries. If they are 
> installed correctly and are the correct version then you should see 
> "64" somewhere in the filename. If you do not then I would recommend 
> you contact your distributor so that they can make sure that you have 
> the correct installer.
>
> kind regards,
>
>  David
>
> On 09/27/2018 02:12, Tatiana Mahavita via TRNSYS-users wrote:
>
>     Dear all,
>
>     I’m using TRNSYS 18 to create a model for domestic hot water
>     system and as I need a condensing boiler in the model with its
>     efficiency in an external file, I wonder if I should modify an
>     existing type (like the 122 or the 751) or create a new one for
>     this. Has anyone already faced the problem ?
>
>     I tried the type 751 (from the TESS librairies) but when I added
>     it to my model, I got the error message saying that the type could
>     not be located in either the TRNdll64.dll or in an external dll,
>     then I was asked to relink the TRNDll64.dll including this type or
>     make sure that an external DLL in the UserLib/Debug DLLs and
>     UserLib/Release DLLs folders contain the type. Can someone please
>     advise me ? Thank you in advance.
>
>     Any help will be really appreciated.
>
>     Best regards,
>
>     Tatiana
>
>
>
>
>     _______________________________________________
>
>     TRNSYS-users mailing list
>
>     TRNSYS-users at lists.onebuilding.org
>     <mailto:TRNSYS-users at lists.onebuilding.org>
>
>     http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
>
> -- 
> ***************************
> David BRADLEY
> Principal
> Thermal Energy Systems Specialists, LLC
> 3 North Pinckney Street - suite 202
> Madison, WI  53703 USA
> P:+1.608.274.2577
> F:+1.608.278.1475
> d.bradley at tess-inc.com <mailto:d.bradley at tess-inc.com>
> http://www.tess-inc.com
> http://www.trnsys.com

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180927/fe5522f5/attachment-0001.html>