[TRNSYS-users] Setting number precision in the output file from Printer

[Mariam Elnour]

Thank you Mr. Thornton. I found the details in  Volume 4: Mathematical Reference.

Regards


________________________________
From: Jeff Thornton <thornton at tess-inc.com>
Sent: Sunday, September 9, 2018 7:21 PM
To: trnsys-users at lists.onebuilding.org
Subject: Re: [TRNSYS-users] Setting number precision in the output file from Printer


Mariam,

You can use the formatted output option in Type 25 to control the output format.  Read the documentation for Type 25 for more details.



Jeff



---
Jeff Thornton
President - TESS LLC
3 N. Pinckney Street, Suite 202, Madison WI USA 53703
Office: (608) 274-2577  Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton at tess-inc.com


On 09/09/2018 3:48 am, Mariam Elnour via TRNSYS-users wrote:

Dear all,

    I would like to ask if its possible to specify the number of digits of the measurements data that are  printed to the output file?



The precision is too high and produces large output files when very small time step and large run duration.





I really really appreciate your reply.

Regards


_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org<mailto:TRNSYS-users at lists.onebuilding.org>
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180910/dddede83/attachment.html>