[TRNSYS-users] (no subject)

[berkane ahlem]

Hello sirs,
I simulate a solar cycle is separate from GSHP cycle for heating a
building and DHW and i have some problems about a solar cycle control
,if  the collector temperature exceeds the tank temperature, GSHP will
not heat the tank and control signal of the solar cycle is set to 1.
In this case, as all of the fluid flow steer by Type 11f as a
controlled diverting valve to the solar collector  and  Type 647-3
will send all of the GSHP heat to the house .If water storage tank,
collector and the building are cold simultaneously, Type 647-3 will
send half the flow through house and half to tank. Iuse controller 2b
, how can i coupled the collector and storage tank with conroller type
2b , should i use 2 controller ( tank and collector) or can i use one
controller between the tank and collector as the output  signal for
equation written for diverter
Tank- fraction = Max(0, (Tank_cold -0.5 House_cold), how can i chose
the control signal Tank_cold
thank you so much
-------------- next part --------------
A non-text attachment was scrubbed...
Name: diagram.docx
Type: application/vnd.openxmlformats-officedocument.wordprocessingml.document
Size: 171598 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180619/90202c8a/attachment-0001.docx>