[TRNSYS-users] How to connect absorption chiller to building cooling load

Sinchote Keeratianant cole_sin at hotmail.com
Mon Jul 23 21:02:32 PDT 2018


Dear Mario and Trnsys users,


Thank you for your comment.


However, I have a question about cooling load in TRNBuild.  In TRNBuild, i set the schedule time of the building during daily(8.00-17.00 hour). When i simulated the cooling load, sometimes i found that the cooling load on that time was zero. I think that it should be have.

How can i resolve it?


Could you help me please?



Thanks.

Sinchote Keeratianant




________________________________
From: Tabet Ismail <tabet21 at yahoo.fr>
Sent: 21 July 2018 4:55 AM
To: Mario Humberto González via TRNSYS-users
Subject: Re: [TRNSYS-users] How to connect absorption chiller to building cooling load

hello
i'm ismail tabet
I'm student beginig in transys
i want to use transys for hybrid photovoltaic thermal collector
can you help m
best regards

Tabet Ismail
Département de physique, faculté des Sciences,
Université 20 Août 1955 skikda , Algérie
i.tabet at univ-skikda.dz
tabet21 at yahoo.fr


Le vendredi 20 juillet 2018 à 23:32:49 UTC+2, Mario Humberto González via TRNSYS-users <trnsys-users at lists.onebuilding.org> a écrit :


Dear Sinchote Keeratianant,

In TRNBuild you can define a new ventilation type, with temperature, flow rate, and humidity as inputs. Then activate the ventilation on your thermal zone.

This way you will be able to connect type 107 to type 56 in Simulation Studio.

Best,
Mario


From: Sinchote Keeratianant <cole_sin at hotmail.com<mailto:cole_sin at hotmail.com>>
To: "trnsys-users at lists.onebuilding.org<mailto:trnsys-users at lists.onebuilding.org>" <trnsys-users at lists.onebuilding.org<mailto:trnsys-users at lists.onebuilding.org>>
Cc:
Bcc:
Date: Fri, 20 Jul 2018 04:22:21 +0000
Subject: [TRNSYS-users] How to connect absorption chiller to building cooling load

Dear TRNSYS users,

I'm a beginner in TRNSYS and using TRNSYS 18.

I have a performance data of absorption chiller and i would like to validate the cooling capacity of absorption chiller has enough size with building cooling load or not.

Then, How can i connect the absorption chiller model type 107 to building cooling load model type 56?


Could you help me please?


Thank you.


Sinchote Keeratianant




--
Mario González
Estudiante de Maestría en Ciencia y Tecnología Ambiental
Centro de Investigación en Materiales Avanzados, S.C.

Calle CIMAV 110
Ejido Arroyo Seco
34147 Durango Dgo
googlemaps: 23.991642, -104.726418<https://www.google.com.mx/maps/place/CIMAV+Unidad+Durango/@23.9832284,-104.7235413,15z/data=!4m5!3m4!1s0x869bc621a15c53fb:0x807a36fc6594487d!8m2!3d23.9913253!4d-104.7261762>
www.cimav.edu.mx<http://www.cimav.edu.mx/>

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org<mailto:TRNSYS-users at lists.onebuilding.org>
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180724/2415bb0f/attachment-0001.html>


More information about the TRNSYS-users mailing list