[TRNSYS-users] TRNSYS-users Digest, Vol 163, Issue 31

Jeff Thornton thornton at tess-inc.com
Mon Jul 23 18:00:43 PDT 2018


 

Mehrdad, 

The component I am referring to is Type 954. 

Jeff 

---
Jeff Thornton
President - TESS LLC
22 N. Carroll Street, Madison WI USA 53703
Office: (608) 274-2577 Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton at tess-inc.com

On 07/21/2018 2:07 pm, Mehrdad Vojdani via TRNSYS-users wrote: 

> Dear Jeff, 
> 
> I have purchased the TESS HVAC Library. Are you talking about a type that its parameter is COP and capacity?
> If you're talking about a specific type I would appreciate if you mention its type number. 
> If you're talking about some kind of data, please explain more about it. 
> 
> Thanks, 
> Mehrdad 
> 
> On Sat, Jul 21, 2018 at 7:02 PM, Jeff Thornton <thornton at tess-inc.com> wrote:
> 
> Mehrdad, 
> 
> Many manufacturers supply this data for their heat pump products - you just have to look for it on their web sites. Your other option is to purchase the TESS HVAC Library which has a set of normalized data files where you just have to enter a few common parameters like COP and capacity. 
> 
> Jeff 
> 
> Sent from my iPhone 
> 
> On Jul 21, 2018, at 8:58 AM, Mehrdad Vojdani <vojdani227 at gmail.com> wrote:
> 
> Hi Jeff, 
> 
> Thanks for your answer. I check the air source heat pump type. Sample catalogue data includes a lot of information about the heat pump. I cannot find any catalogue with this amount of performance data. 
> 
> I wonder if you know how to get this kind of catalogue? 
> 
> Best regards, 
> Mehrdad 
> 
> On Sat, Jul 21, 2018 at 12:51 AM, <trnsys-users-request at lists.onebuilding.org> wrote:
> Send TRNSYS-users mailing list submissions to
> trnsys-users at lists.onebuilding.org
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [2]
> 
> or, via email, send a message with subject or body 'help' to
> trnsys-users-request at lists.onebuilding.org
> 
> You can reach the person managing the list at
> trnsys-users-owner at lists.onebuilding.org
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
> 
> Today's Topics:
> 
> 1. heat pump system (Mehrdad Vojdani)
> 2. Re: heat pump system (Jeff Thornton)
> 3. How to connect absorption chiller to building cooling load
> (Sinchote Keeratianant)
> 
> ---------- Forwarded message ----------
> From: Mehrdad Vojdani <vojdani227 at gmail.com>
> To: trnsys-users at lists.onebuilding.org
> Cc: 
> Bcc: 
> Date: Fri, 20 Jul 2018 02:33:52 +0430
> Subject: [TRNSYS-users] heat pump system
> 
> Dear trnsys users, 
> 
> I want to model a DX heat pump in trnsys. this system includes an outdoor air cooled heat exchanger, indoor heat exchanger, compressor and expansion valve. 
> Rhere are too many heat pumps in hvac TESS library and I'm confused about tupe selection. 
> 
> This heat pump can be modeled type by type ( compressor , ... ) but there is no benefit in that for me. 
> I want system COP and power consumption as output. 
> 
> I would appreciate if you can help me with right type selection foe my system . 
> 
> Thanks for your answers, 
> Best Regard, 
> Mehrdad. 
> 
> ---------- Forwarded message ----------
> From: Jeff Thornton <thornton at tess-inc.com>
> To: "TRNSYS users mailing list at OneBuilding.org [3]" <trnsys-users at lists.onebuilding.org>
> Cc: 
> Bcc: 
> Date: Thu, 19 Jul 2018 18:13:29 -0500
> Subject: Re: [TRNSYS-users] heat pump system
> 
> The device you are referring to is called an air source heat pump within the TRNSYS environment. There are models in the standard HVAC library as well within the TESS HVAC Library for TRNSYS. Both rely on a catalog data look up approach based on indoor and outdoor conditions. 
> 
> Jeff 
> 
> ---
> Jeff Thornton
> President - TESS LLC
> 22 N. Carroll Street, Madison WI USA 53703
> Office: (608) 274-2577 Fax: (608) 278-1475
> www.tess-inc.com [1]
> E-Mail: thornton at tess-inc.com
> 
> On 07/19/2018 5:03 pm, Mehrdad Vojdani via TRNSYS-users wrote: 
> Dear trnsys users, 
> 
> I want to model a DX heat pump in trnsys. this system includes an outdoor air cooled heat exchanger, indoor heat exchanger, compressor and expansion valve. 
> Rhere are too many heat pumps in hvac TESS library and I'm confused about tupe selection. 
> 
> This heat pump can be modeled type by type ( compressor , ... ) but there is no benefit in that for me. 
> I want system COP and power consumption as output. 
> 
> I would appreciate if you can help me with right type selection foe my system . 
> 
> Thanks for your answers, 
> Best Regard, 
> Mehrdad. 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [2]
> 
> ---------- Forwarded message ----------
> From: Sinchote Keeratianant <cole_sin at hotmail.com>
> To: "trnsys-users at lists.onebuilding.org" <trnsys-users at lists.onebuilding.org>
> Cc: 
> Bcc: 
> Date: Fri, 20 Jul 2018 04:22:21 +0000
> Subject: [TRNSYS-users] How to connect absorption chiller to building cooling load
> 
> Dear TRNSYS users, 
> 
> I'm a beginner in TRNSYS and using TRNSYS 18. 
> 
> I have a performance data of absorption chiller and i would like to validate the cooling capacity of absorption chiller has enough size with building cooling load or not. 
> 
> Then, How can i connect the absorption chiller model type 107 to building cooling load model type 56? 
> 
> Could you help me please? 
> 
> Thank you. 
> 
> Sinchote Keeratianant 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [2]

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
[2]

 

Links:
------
[1] http://www.tess-inc.com
[2]
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
[3] http://OneBuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180723/ebac3701/attachment.html>


More information about the TRNSYS-users mailing list