[TRNSYS-users] TESS Type 534 version with Plug-in

[Jeff Thornton]

Simon,

Make sure the node numbers for the inlet and outlet ports are within the range you set by the "Number of Tank Nodes" parameter. That's usually the problem.

Jeff/TESS

Sent from my iPhone

> On Jan 30, 2018, at 8:12 AM, Simon Martinez via TRNSYS-users <trnsys-users at lists.onebuilding.org> wrote:
> 
> Dear all,
> 
> I'm trying to use Type 534 from TESS library to model a cyclindrical storage tank. I manage to define input/output for 1 heat exchanger but when I add a "port" I get this error : 
> 
> "The TRNSYS TYPE checking routine has found an inconstency in the specified component between the finput file dans the information expected by the Type
> 
> Reported information : An illegal PARAMETER value has been reported by the model. The model has reported that Parameter 35 is the problem - but this may not be the case. Please check the component configuration"
> 
> Any suggestion ?
> 
> Best regards
> 
> -- 
> Simon Martinez 
> Doctorant en micro-cogénération solaire 
> Laboratoire des Sciences de l'Ingénieur pour l'Environnement (LaSIE) 
> simon.martinez at univ-lr.fr 
> Tél : 06 17 15 76 64 
> 
> Université de La Rochelle 
> 23 avenue Albert Einstein 
> BP 33060 - 17031 La Rochelle 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180130/1fd2f216/attachment.html>