[TRNSYS-users] (no subject)

[Domenico Mazzeo]

Hello,
I believe that it depends on the set point temperature fixed in the
calculation of the energy needs and on the temperatures reached every hour
in the building. My idea is that in the simulation with the heat pump, the
air temperature in the building is not the same of that set in the
simulation performed for the energy needs calculation
Regards

Il Mer 1 Ago 2018, 21:04 berkane ahlem via TRNSYS-users <
trnsys-users at lists.onebuilding.org> ha scritto:

> Hello,sirs
> I simulate a ground source heat pump system for heating a DHWand building,
> the heating load of building was *5019kwh*/year,i use a heat pump with
> capacity 8kw , and i use the relation q=mcp(Tin-Tout) to calculate energy
> delivered to the radiant floor and i found *14711,6kwh/*year .I did not
> understand this result , building Just needs 5019kwh/year
> Thank you
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>

-- 
-------------------------------------------------------------------------------

Il banner è generato automaticamente dal servizio di posta elettronica 
dell'Università della Calabria
 <http://www.unical.it/ammissione>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180801/e656556a/attachment.html>