[TRNSYS-users] Calculation Time (TRNSYS 17)

[David BRADLEY]

Mario,

   If each of the projects that you are running from your batch has a 
different name then each will produce a *.lst file as it completes. The 
lst file is the only place where that summary information is written. It 
would be possible to write a new Type that would make the simulation 
time available as an output and then print that value to a file using 
one of the standard printer components. However, that Type does not 
exist as far as I am aware.

kind regards,

  David



On 04/10/2018 19:05, Mario González via TRNSYS-users wrote:
> Dear TRNSYS users,
>
> The total calculation time can be found on the last line of the .lst 
> file, but I want to know if it can be extracted and printed from an 
> output in the Studio. This is because I am running TRNSYS 17 in batch 
> from the CMD with the "\h" parameter.
>
> I want to know the execution time of each simulation. Is this 
> possible? Or I have to do it with cmd/powershell commands with the 
> .lst files?
>
> Thanks in advance,
>
> Mario
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180411/35e6a054/attachment-0001.html>