[TRNSYS-users] Type 541f from TESS

Thu Dec 14 10:30:32 PST 2017

Hello David,
Many thanks for the reply.
The TRNSYS version is <17.02.0005> and TESS libraries are
<TESSSolarLibrary_v17.00_Release.dll>.
Best regards,

--
Jorge Facão

On 12-Dec-17 19:45, David BRADLEY wrote:
> Jorge,
>
>  Which version of TRNSYS and which version of the TESS Libraries are
> you using? The TRNSYS version can be determined by opening trnsys.ini
> with a text editor. The TESS Libraries version can be determined by
> looking at the filenames of the dlls that are located in the
> ..\trnsysXX\UserLib\ReleaseDLLs\ directory.
>
> kind regards,
>
>  David
>
>
>
> On 12/11/2017 13:08, Jorge Facao via TRNSYS-users wrote:
>> Hello,
>> I am trying to use the Type 541f for a ICS solar system.
>> With a very simple deck I get the error below. The type parameters is
>> limited to 17 in parameters tab.
>>
>> *** Fatal Error at time   :         0.000000
>>     Generated by Unit     :     2
>>     Generated by Type     :   541
>>     TRNSYS Message    133 : The current Unit has specified more
>> Parameters than are expected.
>>     Reported information  : 19 PARAMETERS are required and 17
>> PARAMETERS were specified.
>>
>> Any suggestion to solve this problem?
>> Regards,
>>
>> --
>> Jorge Facão
>>
>> Laboratório Nacional de Energia e Geologia (LNEG)
>> Laboratório de Energia Solar
>> Estrada do Paço do Lumiar, 22
>> 1649-038 Lisboa - Portugal
>> T: +351-210924600/1; Ext: 4379
>> skype: jfacao
>>
>>
>>
>>
>>
>>
>> UNIT 2 TYPE 541     Type541f
>> *$UNIT_NAME Type541f
>> *$MODEL .\Solar Library (TESS)\Integral Collector Storage Systems\Flat
>> Plate ICS Collectors\Without HX\Theoretical IAM's\Type541f.tmf
>> *$POSITION 629 331
>> *$LAYER Main #
>> *$# Versions of this ICS model are available for different HX
>> configurations (vertical tube bank, horizontal tube
>> *$# bank, and coiled tube HX) and for different incidence angle modifier
>> accounting (single axis data file,
>> *$# bi-axial data file, cover and absorber properties, etc.) for a small
>> upgrade fee.  Contact TESS at (608) 274-
>> *$# 2577 for more information.
>> PARAMETERS 17
>> 5        ! 1 # of Tank Nodes
>> 1        ! 2 Noding scheme
>> 0        ! 3 Heat Exchanger Geometry
>> 1.19        ! 4 Tank Length
>> 1.15        ! 5 Tank Width
>> 0.062        ! 6 Tank Depth
>> 1        ! 7 Tank Fluid
>> 0        ! 8 Percent Volume of Tank Fluid
>> 16        ! 9 Initial Tank Temperature
>> 5.0        ! 10 Edge Loss Coefficient
>> 5.0        ! 11 Bottom Loss Coefficient
>> 0        ! 12 Additional Thermal Conductivity Mode
>> 5        ! 13 IAM Mode
>> 0.9        ! 14 Plate absorptance
>> 2        ! 15 Number of covers
>> 1.586        ! 16 Cover refractive index
>> 0.05        ! 17 Extinction-thickness product
>> INPUTS 28
>> 0,0        ! [unconnected] Inlet Temperature
>> 0,0        ! [unconnected] Inlet Flow Rate
>> 0,0        ! [unconnected] Top Loss Temperature
>> 0,0        ! [unconnected] Incident solar radiation
>> 0,0        ! [unconnected] Horizontal diffuse radiation
>> 0,0        ! [unconnected] Total horizontal radiation
>> 0,0        ! [unconnected] Incident diffuse radiation
>> 0,0        ! [unconnected] Incidence angle
>> 0,0        ! [unconnected] Solar zenith angle
>> 0,0        ! [unconnected] Solar azimuth angle
>> 0,0        ! [unconnected] Top Surface Slope
>> 0,0        ! [unconnected] Surface azimuth
>> 0,0        ! [unconnected] Ground reflectance
>> 0,0        ! [unconnected] Edge&Back Loss Temperature
>> 0,0        ! [unconnected] Safety Loss Temperature
>> 0,0        ! [unconnected] Inversion Mixing Flow Rate
>> 0,0        ! [unconnected] Collector transmittance absorptance product
>> 0,0        ! [unconnected] Top loss coefficient
>> 0,0        ! [unconnected] Additional top losses
>> 0,0        ! [unconnected] Safety loss coefficient-1
>> 0,0        ! [unconnected] Safety loss coefficient-2
>> 0,0        ! [unconnected] Safety loss coefficient-3
>> 0,0        ! [unconnected] Safety loss coefficient-4
>> 0,0        ! [unconnected] Safety loss coefficient-5
>> 0,0        ! [unconnected] Additional internodal conductivity-1
>> 0,0        ! [unconnected] Additional internodal conductivity-2
>> 0,0        ! [unconnected] Additional internodal conductivity-3
>> 0,0        ! [unconnected] Additional internodal conductivity-4
>> *** INITIAL INPUT VALUES
>> 20.0 0.0 20.0 0.0 0 0 0 0 0 0 45 0 0.2 10.0 10.0 0.0 0.7 15.0 0.0 0 0 0
>> 0 0 0 0 0 0
>> DERIVATIVES 5
>> 16        ! 1 Initial Temperature of Node-1
>> 16        ! 2 Initial Temperature of Node-2
>> 16        ! 3 Initial Temperature of Node-3
>> 16        ! 4 Initial Temperature of Node-4
>> 16        ! 5 Initial Temperature of Node-5
>> *------------------------------------------------------------------------------
>>
>>
>> END
>>
>>
>>
>>
>>
>> - AVISO -
>>
>> Esta mensagem de correio eletrónico e quaisquer dos seus ficheiros
>> anexos, caso existam, são confidenciais e destinados apenas à(s)
>> pessoa(s) ou entidade(s) acima referida(s), podendo conter informação
>> confidencial, privilegiada, a qual não deverá ser divulgada, copiada,
>> gravada ou distribuída nos termos da lei vigente. Se não é o
>> destinatário da mensagem, ou se ela lhe foi enviada por engano,
>> agradecemos que não faça uso ou divulgação da mesma. Se recebeu esta
>> mensagem por engano, por favor avise-nos de imediato, por correio
>> eletrónico, para o endereço acima e apague este e-mail do seu sistema.
>>
>> Obrigado.
>>
>>
>>
>> - NOTICE -
>>
>> This e-mail transmission and eventual attached files are intended
>> only for the use of the individual or entity named above and may
>> contain information that is confidential, privileged and exempt from
>> disclosure under applicable law. If you are not the intended
>> recipient, or if you have received this transmission in error, please
>> immediately notify us by e-mail at the above address and delete this
>> e-mail from your system.
>>
>> Thank you.
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at lists.onebuilding.org
>> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>

--
Jorge Facão

Laboratório Nacional de Energia e Geologia (LNEG)
Laboratório de Energia Solar
Estrada do Paço do Lumiar, 22
1649-038 Lisboa - Portugal
T: +351-210924600/1; Ext: 4379
skype: jfacao

- AVISO -

Esta mensagem de correio eletrónico e quaisquer dos seus ficheiros anexos, caso existam, são confidenciais e destinados apenas à(s) pessoa(s) ou entidade(s) acima referida(s), podendo conter informação confidencial, privilegiada, a qual não deverá ser divulgada, copiada, gravada ou distribuída nos termos da lei vigente. Se não é o destinatário da mensagem, ou se ela lhe foi enviada por engano, agradecemos que não faça uso ou divulgação da mesma. Se recebeu esta mensagem por engano, por favor avise-nos de imediato, por correio eletrónico, para o endereço acima e apague este e-mail do seu sistema.

Obrigado.

- NOTICE -

This e-mail transmission and eventual attached files are intended only for the use of the individual or entity named above and may contain information that is confidential, privileged and exempt from disclosure under applicable law. If you are not the intended recipient, or if you have received this transmission in error, please immediately notify us by e-mail at the above address and delete this e-mail from your system.

Thank you.