[TRNSYS-users] Logical unit 265 error

[David BRADLEY]

Antonio,

   I would guess that the number of values of the various variables that 
are parameters in the proforma do not match the number of values of 
those variables that are provided in the data file. It is not really 
possible to know without having the project (*.tpf) and the heat pump 
data files (*.dat).

kind regards,

  David



On 12/12/2017 11:49, Antonio Andricciola via TRNSYS-users wrote:
> Hi everyone,
> I'm using a heat pump model in TRNSYS through a performance map. When 
> I couple the heat pump with radiators and the building model 
> everything is okay, but when I try to change the radiators into floor 
> heating (using the active layer) I get an error (I took a screenshot 
> and attached to this email). Do you have any idea why and what is it? 
> Thanks in advance.
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20171212/dbf08709/attachment.html>