[TRNSYS-users] Error creating Large Opening in TRNFLOW

[Yose Wandy]

Hi again,

 

I somehow manage to overcome the problem by adding a crack into the zone
from an external node.

Weirdly though it only show 0 massflow from/to each connected airnodes,
although I have a ventilation system in the simulation model and the plot
shows the effect of the ventilation system in each airnode.

 

Best regards,

Yose Wandy

 

Von: Yose Wandy [mailto:y.wandy at ostfalia.de] 
Gesendet: Montag, 10. August 2015 09:04
An: trnsys-users at lists.onebuilding.org
Betreff: [TRNSYS-users] Error creating Large Opening in TRNFLOW

 

Hi TRNSYS-Experts,

 

I tried to connect two airnodes within a zone in order to have the airflow
between the airnodes calculated (splitting a room into 2 airnodes) and came
across an Error saying that there aren’t any adjacent wall or coupling. .
The “virtual surface” for both zones was created as usual in Trnsys3d and
the airnodes were connected into a mutual zone in TRNbuild.

*Refer to image 1.

 

So I activated the “Upper” coupling with 0 kg/h massflow  of both airnodes
to each other and came across another error saying that the airlink network
isn’t properly connected.

*refer to image 2

 

Has anybody encountered the same problem? Or did I miss any step in order to
simulate an opening in trnflow? I already dig in the mailing list archive
and found nothing, it would be nice if somebody can help.

 

Thanks in advance.

 

Best regards,

 

----------------------------------------------------------------------------
----

Yose Wandy  B.Sc.

Wissenschaftlicher Mitarbeiter

 

Beschreibung: nur_logo_kleinOstfalia Hochschule für angewandte
Wissenschaften

Hochschule Braunschweig/Wolfenbüttel

Fakultät Versorgungstechnik

Institut für energieoptimierte Systeme  (EOS)

Prof. Dr.-Ing. Lars Kühl

 

Salzdahlumer Straße 46-48

D  - 38302 Wolfenbüttel

 

www.ostfalia.de/v

 

Tel. 0049 - 5331 / 939 – 40 550

Fax 0049 - 5331 / 939 – 40 552

y.wandy at ostfalia.de

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150810/315d4d24/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1161 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150810/315d4d24/attachment.jpg>