[TRNSYS-users] TRNSYS 3D: ADJ_CEILINGs Recognized in TRNSYS 3D but not in TRNBUILD

Aaron Danenberg aaron_danenberg at hotmail.com
Wed Jul 17 17:27:30 PDT 2013


Fellow TRNSYS Users:
I have a simple building I created in TRNSYS 3D.  When working in SU2013 I can see use the "Info Tool" to verify that a ceiling in the first floor corresponds to the interior floor on the second floor.  However once I open in TRNBUILD all of the adjacent ceilings become undefined.  I manually opened the IDF file, and could not see anything strange.
I have attached the IDF file.  Please let me know what I may be doing wrong or if there is some kind of work around.  I would prefer to not use a manual override and loose the ability to make additional edits with SU2013.
The building consists of 3 floors, and 4 zones per floor.  The zone nomenclature is F = Floor, the first number is the floor #, and the second number the zone number.  For example F21 is on top of F11.
Thank you,
Aaron Danenberg

  		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130717/3f4d1a0b/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: GBUILDING.idf
Type: application/octet-stream
Size: 141804 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130717/3f4d1a0b/attachment-0001.obj>


More information about the TRNSYS-users mailing list