<html>
<head>
<meta content="text/html; charset=windows-1252"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<div class="moz-cite-prefix">Hello Mike<br>
<br>
I had the same problem. The reviewer asked me why I got electric
consumption for a gas boiler. In the reply I explained him about
the interlock component and it was fine.<br>
After that question I always deleted the interlock component so I
don´t get any comments on that. I don´t think is a good idea to
put them as process load because its part of the hot water system.<br>
<br>
On 22/08/2014 05:00 p.m., Mike Oliva wrote:<br>
</div>
<blockquote
cite="mid:CAGvpDANTK-Nc5EP2q3PMGOSOMc2pzSCX=vor9TiEqJxsg1e-Kg@mail.gmail.com"
type="cite">
<div dir="ltr">
<div>
<div>I'm modeling for LEED and trying to make sure I have
everything accounted for w/ in the requirements and for
submitting to LEED online but I think I have an issue with
the way TRACE applies these energy riders of the control
panel & interlocks to some plants (90.1 boiler =
0.5kw). For one, the energy use is applied to electrical
space heating component even if Gas (ex. boiler) and LEED
does not allow electrical space heating use for fossil fuel
heating source, so I extract that energy use to define as
process energy. I have a boiler in both cases so both are
modeled with the same rider (0.5kw). <br>
<br>
The next issue I come up w/ since I've pulled out that
electrical as process is that the proposed boiler runs for
much fewer hours than the baseline so even tho the control
panel interlock energy use is the same for each, the
difference in run time causes the baseline to be quite a bit
more. <br>
<br>
</div>
Curious what folks are doing in this situation, or has it ever
come up? are you creating copies of all the Trace 90.1 plants
and removing the control panel & interlock component? <br>
<br>
</div>
Thanks,<br>
Mike<br>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
Trace-users mailing list
<a class="moz-txt-link-freetext" href="http://lists.onebuilding.org/listinfo.cgi/trace-users-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/trace-users-onebuilding.org</a>
To unsubscribe from this mailing list send a blank message to <a class="moz-txt-link-abbreviated" href="mailto:TRACE-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">TRACE-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a>
</pre>
</blockquote>
<br>
</body>
</html>