<div><br clear="all">Hello, everybody!</div>
<div> </div>
<div>I am new in energy model design and need your help. </div>
<div> </div>
<div>I am doing energy model for the one story building that includes offices and a bus maintanance garage. </div>
<div>Geothermal, radiant, and OA dedicated systems provide cooling and heating for offices, also ventilation and heating for garage.  OA dedicated system with heat pumps is used for the offices, and 100% make-up air gas-fired unit, radiant heating,and gas-fired unit heaters are used for the bus maintanance. </div>

<div>For the Baseline design I have chosen system #4 because main system is electrical. So I have picked constant - volume single zone systems for every thermal block, two air-cooled air-to-air heat pump plants, and two  heating plants with electrical resistance.</div>

<div> </div>
<div>In the proposed design I have hydronic in heat pump fans as primary fans,  FC Centrifugal fans as system exhaust fans,and  VAV/Inlet vn fan as the optional ventilation for offices.</div>
<div> </div>
<div>My questions are </div>
<div> </div>
<div>1. Do I have to use the same type of  fans for the Baseline design?</div>
<div>2.  If I mark the box ECB/PRM rules to fan sizing in energy parameters, do I have to use the same energy rates for the baseline design as for the proposed design, and the system calculate fan power automatically?</div>

<div>3. How is it correct to show radiant heating in the proposed design? I've added extra back-up boiler for the ground source heat pump plant . Is it correct? </div>
<div> </div>
<div>Thank you,</div>
<div> </div>
<div>Evgenia<br></div>