[Trace-users] Ground Source VRF in Trace

[Shane Wells]

Does anyone have suggestions for modeling ground source VRF with heat recovery in Trace? Is it a new unloading curve that would be needed or are Trace's limitations deeper than this?

Shane Wells, EI
Mechanical Systems Designer

hp  e n g i n e e r i n g , i n c .
1800 S. Osage Springs Drive
Suite 110
Rogers, Arkansas 72758
479.899.6370  ext. 371
www.hpengineeringinc.com<http://www.hpengineeringinc.com/>
[cid:image001.jpg at 01D01071.66AD32C0]
Thank you for voting us Best Engineering Firm in Northwest Arkansas!
We are honored to be your consulting engineering firm and are grateful for your continued support.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trace-users-onebuilding.org/attachments/20150901/7247da36/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 9207 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/trace-users-onebuilding.org/attachments/20150901/7247da36/attachment.jpg>