[Trace-users] Trace-users Digest, Vol 22, Issue 1

[Jon Evans]

Grant,

Search the help file in Trace with regards to GSHPCalc.  There is a .csv file that Trace generates ("file name".GL4.csv) located in the same directory as the .TRC that has the information you are looking for.  This .csv file can be imported by GSHPCalc. Use with caution - make sure your load file is accurate; otherwise your GSHPCalc sizing will be incorrect.

Hope this answers your question.  

Jon Evans, PE, LEED AP
Senior Project Engineer | jevans at sustaineng.com
901 Deming Way, Suite 201 | Madison, Wisconsin 53717
608.836.4488 ext. 13 | Fax: 608.836.4477
www.sustaineng.com


-----Original Message-----
From: trace-users-bounces at lists.onebuilding.org [mailto:trace-users-bounces at lists.onebuilding.org] On Behalf Of trace-users-request at lists.onebuilding.org
Sent: Monday, May 03, 2010 2:08 PM
To: trace-users at lists.onebuilding.org
Subject: Trace-users Digest, Vol 22, Issue 1

Send Trace-users mailing list submissions to
	trace-users at lists.onebuilding.org

To subscribe or unsubscribe via the World Wide Web, visit
	http://lists.onebuilding.org/listinfo.cgi/trace-users-onebuilding.org
or, via email, send a message with subject or body 'help' to
	trace-users-request at lists.onebuilding.org

You can reach the person managing the list at
	trace-users-owner at lists.onebuilding.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Trace-users digest..."


Today's Topics:

   1. Re: Using Trace and GSHPCalc V5.0 (Page, Grant B)


----------------------------------------------------------------------

Message: 1
Date: Mon, 3 May 2010 07:26:22 -0400
From: "Page, Grant B" <Grant.Page at masonandhanger.com>
To: <trace-users at lists.onebuilding.org>
Subject: Re: [Trace-users] Using Trace and GSHPCalc V5.0
Message-ID:
	<24478E43B30D7E4A8D81736C84A7A4B703A698DF at lexmail.corp.dayzim.com>
Content-Type: text/plain;	charset="us-ascii"


If you can import GbXml into GshpCalc, it's an undocumented feature from
as near as I can tell. 

I'm still looking for suggestions on the following:

My question more generally: I'd like to get data out of Trace on a
particular zone design heating and cooling load at specific times of the
day. One way I see I can do that is to goto the "Calcuate" tab, "Change
Load Parameters" and then change the peak hour to 1-24, run the load
simulation, log the data in excel, rinse, repeat for all 24 hours and
then sort data in excel. 

Thanks for the help.

Grant

Message: 2
Date: Fri, 30 Apr 2010 10:30:57 -0500
From: "Caleb Bulow" <cbulow at prengr.net>
To: "Page, Grant B" <Grant.Page at masonandhanger.com>,
	<trace-users at lists.onebuilding.org>
Subject: Re: [Trace-users] Using Trace and GSHPCalc V5.0
Message-ID:
	
<5A9E2BCF40EB0F47A54A4D45A6EFA0CE7535BC at server1.prairie.prengr.net>
Content-Type: text/plain; charset="us-ascii"

I am told that GshpCalc can import GbXml files.  If so, then Trace can
export a GbXml file and you should be able to get your model in that
way.

 

Caleb B. 

  PRAIRIE ENGINEERING, P.C.

 



------------------------------

_______________________________________________
Trace-users mailing list
Trace-users at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trace-users-onebuilding.org


End of Trace-users Digest, Vol 22, Issue 1
******************************************