[Trace-users] District Thermal Energy for LEED

[Snarski, Marty]

Hello, all.

 

So, I'm (still) working on an energy model involving District Steam and
Chilled Water, and am abiding by the LEED Document "Required Treatment
of District Thermal Energy in LEED-NC version 2.2 and LEED for Schools,"
as required by both LEED 2.2 and LEED 2009 (see
http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/2009
-October/002509.html).

 

However, in looking at the document, it doesn't seem to take into
account the new point-structure.  According to one paragraph in the EA
credit 1 section, "The total number of EAc1 points achievable in Step 2
is limited to 4 points above the number determined in Step 1, up to a
maximum of 10 total points for the project."  Should these numbers be
changed (at least theoretically), to account for the potential of 19
points in the 2009 EAc1?

 

Has anyone encountered this, or know if a new revision of this paper is
in the works?

 

Thanks!

 

 

Martin Snarski   LEED(r) AP 
Mechanical Engineer 

 



NOTICE:
This e-mail transmission is intended only for the use of the individual or entity named above and may contain information that is confidential, privileged, and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any review, disclosure, copying, distribution, or other use of any of the information contained in this transmission is strictly prohibited. If you have received this transmission in error, please immediately notify the sender by e-mail at the above address and delete it from your computer system; you should not copy the message or disclose its contents to anyone. The content of the message and or attachments may not reflect the view and opinions of the originating company or any party it is representing.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trace-users-onebuilding.org/attachments/20100126/57cc7bd1/attachment.htm>