[Trace-users] Two-Fan Double-Duct Humidification

Bob Vogt BVogt at luckett-farley.com
Mon Sep 14 06:45:31 PDT 2009


I am working on a LEED job comparing a 2FDD system to a VAVRH system
using A90 Appendix G. The humidification load on the 2FDD uses the room
total cfm for sizing where the VAVRH uses the minimum OA for sizing.
200,000 cfm verses 50,000 cfm. The 2FDD humidification load is nearly
four times the VAVRH. Per Trace Help both humidification coils are at
the same location as the cooling coil.
 
Can anyone offer an explanation.
 
Thanks
 
Robert Vogt
Mechanical Group, LEED Accredited Professional
Luckett & Farley
      [smart design]
737 South Third Street
Louisville, Kentucky 40202
502-585-4181 x105
502-587-0488 Fax
Bvogt at luckett-farley.com
www.luckett-farley.com <http://www.luckett-farley.com/> 
Founded 1853
 
P Please consider the environment before printing this e-mail. 
This electronic message is intended for transmission to authorized
persons only. It may contain information that is confidential,
privileged, proprietary or subject to other confidentiality protections.
It is not intended for transmission to, or receipt by, any unauthorized
persons. If you are not authorized to receive this message, you may not
review, copy, forward or otherwise distribute this message. If you have
received this message in error, please notify the sender by reply e-mail
and delete it from your system. Thank you
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trace-users-onebuilding.org/attachments/20090914/3ba554f0/attachment.htm>


More information about the Trace-users mailing list