[Trace-users] Revit Export and import into Trace?

[Jason Wendel]

One of my problems is getting it to recognize the room names so I can
distinguish which room is which when it's imported into Trace.  It just
names it from 1 to whatever.  How do I get it to recognize the names
from the revit file?

 

-Jason

 

From: Jeff Buscher [mailto:jeff.buscher at gmail.com] 
Sent: Wednesday, November 04, 2009 8:52 AM
To: Jason Wendel
Cc: trace-users at lists.onebuilding.org
Subject: Re: [Trace-users] Revit Export and import into Trace?

 

Revit:  export gbXML
Trace:  File/Import gbXML

I've imported files to see how it does, but I haven't actually used it
yet.  It seems to ignore exterior shading, which is the main thing I was
hoping to get from it.





On Wed, Nov 4, 2009 at 10:40 AM, Jason Wendel <jwendel at heatheng.com>
wrote:

I know it's possible, but how practical is it to export a file from
Revit and import it into Trace 700 for calculations?  AND, how do you do
it?

 

-Jason

 


_______________________________________________
Trace-users mailing list
http://lists.onebuilding.org/listinfo.cgi/trace-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
TRACE-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trace-users-onebuilding.org/attachments/20091104/807ad54f/attachment-0002.htm>