[Trace-users] Purchased Steam with Heat Exchanger

[Snarski, Marty]

Hello,

 

I'm working on a project that will utilize Campus Steam coming into the
building, and running immediately through a heat exchanger to create Hot
Water, which will, in turn, feed the building.  I've looked at the
"Purchased Steam" scenario in the user's manual, but am unsure as to
where to go from there.

 

Any suggestions?

 

Thanks!

 

 

Martin Snarski   LEED(r) AP 
Mechanical Engineer 

 



NOTICE:
This e-mail transmission is intended only for the use of the individual or entity named above and may contain information that is confidential, privileged, and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any review, disclosure, copying, distribution, or other use of any of the information contained in this transmission is strictly prohibited. If you have received this transmission in error, please immediately notify the sender by e-mail at the above address and delete it from your computer system; you should not copy the message or disclose its contents to anyone. The content of the message and or attachments may not reflect the view and opinions of the originating company or any party it is representing.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trace-users-onebuilding.org/attachments/20091210/f7a80ac3/attachment.htm>