[Trace-users] Baseline Model Rotations

[Greg Topp]

Actually it is easier than that.   if you pick Performance rating method
under calculate and review results and then select Alternative 1 and
then after running select Performance rating Method details you'll have
it. 

 

Gregory C. Topp, P.E., LEED-AP

Roger D. Fields & Associates

4588 Kenny Road

Columbus, Ohio  43220-2777

P:  (614) 451-2248

F:  (614) 451-6628

E-mail:  gtopp at rdfa.com

 

This e-mail and any attached files are confidential and protected by
copyright, and may be legally privileged.  If you are not the intended
addressee, any use of this e-mail - by copying, distributing, or
otherwise disseminating its contents - is strictly prohibited.  If you
have received this e-mail by mistake, notify the sender immediately, and
destroy all copies of this e-mail.  This e-mail may not be secure,
error-free, or free from malicious programs, such as viruses.  Roger D.
Fields & Associates shall not be liable for any loss or damage that may
result from any malicious programs, or from an unintended, unauthorized,
or unlawful use of this e-mail.

________________________________

From: trace-users-bounces at lists.onebuilding.org
[mailto:trace-users-bounces at lists.onebuilding.org] On Behalf Of Steve
Tobin
Sent: Tuesday, April 07, 2009 12:54 PM
To: trace-users at lists.onebuilding.org
Subject: [Trace-users] Baseline Model Rotations

 

All,

When creating a model for LEED Submittal in Trane Trace 700 is there an
easy way to model the rotations of the baseline model?

 

I have created my design and baseline models to where they need to be;
however, I still need to do the rotations.  The only way I see to do
this is to create an alternative for each rotation and then change the
wall and roof orientations for each room created.  I have not been able
to find a easier way to do this but I would assume that if there is an
Appendix G summary report there would be an easier way to model the
rotations of the baseline model.  Any help would be greatly appreciated.

Thanks,

 

 

 

Steve Tobin

PROJECT ENGINEER

25501 west valley parkway

olathe ks 66061

direct 913 344.0061

fax 913 345.0617

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trace-users-onebuilding.org/attachments/20090407/d7cf0191/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 167497 bytes
Desc: image003.jpg
URL: <http://lists.onebuilding.org/pipermail/trace-users-onebuilding.org/attachments/20090407/d7cf0191/attachment-0004.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1778 bytes
Desc: image004.jpg
URL: <http://lists.onebuilding.org/pipermail/trace-users-onebuilding.org/attachments/20090407/d7cf0191/attachment-0005.jpeg>