[Trace-users] Baseline Model Rotations

[Steve Tobin]

All,

When creating a model for LEED Submittal in Trane Trace 700 is there an
easy way to model the rotations of the baseline model?

 

I have created my design and baseline models to where they need to be;
however, I still need to do the rotations.  The only way I see to do
this is to create an alternative for each rotation and then change the
wall and roof orientations for each room created.  I have not been able
to find a easier way to do this but I would assume that if there is an
Appendix G summary report there would be an easier way to model the
rotations of the baseline model.  Any help would be greatly appreciated.

Thanks,

 

 

 

Steve Tobin

PROJECT ENGINEER

25501 west valley parkway

olathe ks 66061

direct 913 344.0061

fax 913 345.0617

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trace-users-onebuilding.org/attachments/20090407/fd547d3d/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1778 bytes
Desc: image002.jpg
URL: <http://lists.onebuilding.org/pipermail/trace-users-onebuilding.org/attachments/20090407/fd547d3d/attachment.jpeg>