[Simergy-users] Misconfiguration of wall names
Paulo Roberto via Simergy-users
simergy-users at lists.onebuilding.org
Mon Nov 21 10:19:57 PST 2016
GlobalGeometryRules,
UpperLeftCorner, !- Starting Vertex Position
Counterclockwise, !- Vertex Entry Direction
World, !- Coordinate System
Relative, !- Daylighting Reference Point Coordinate System
Relative; !- Rectangular Surface Coordinate System
Site:Location,
BRA_MG_Vicosa -TMY, !- Name
-20.77, !- Latitude {deg}
-42.87, !- Longitude {deg}
-3, !- Time Zone {hr}
712.2; !- Elevation {m}
Building,
Trab03, !- Name
0, !- North Axis {deg}
Suburbs, !- Terrain
0.04, !- Loads Convergence Tolerance Value
0.4, !- Temperature Convergence Tolerance Value {deltaC}
FullExterior, !- Solar Distribution
25, !- Maximum Number of Warmup Days
6; !- Minimum Number of Warmup Days
BuildingSurface:Detailed,
Z3|_Teto, !- Name
Roof, !- Surface Type
Telhado, !- Construction Name
Z3, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
Autocalculate, !- View Factor to Ground
4, !- Number of Vertices
0,14,3, !- X,Y,Z ==> Vertex 1 {m}
0,8,3, !- X,Y,Z ==> Vertex 2 {m}
4,8,3, !- X,Y,Z ==> Vertex 3 {m}
4,14,3; !- X,Y,Z ==> Vertex 4 {m}
Construction,
Telhado, !- Name
Telha_10mm, !- Outside Layer
CamaraAr_5cm, !- Layer 2
LajeCob_120mm; !- Layer 3
Material,
Telha_10mm, !- Name
MediumRough, !- Roughness
0.01, !- Thickness {m}
1.05, !- Conductivity {W/m-K}
2000, !- Density {kg/m3}
920, !- Specific Heat {J/kg-K}
0.9, !- Thermal Absorptance
0.73, !- Solar Absorptance
0.7; !- Visible Absorptance
Material:AirGap,
CamaraAr_5cm, !- Name
0.21; !- Thermal Resistance {m2-K/W}
Material,
LajeCob_120mm, !- Name
Rough, !- Roughness
0.095, !- Thickness {m}
1.05, !- Conductivity {W/m-K}
1087, !- Density {kg/m3}
920, !- Specific Heat {J/kg-K}
0.9, !- Thermal Absorptance
0.73, !- Solar Absorptance
0.7; !- Visible Absorptance
BuildingSurface:Detailed,
Z3|_Piso, !- Name
Floor, !- Surface Type
Piso, !- Construction Name
Z3, !- Zone Name
Ground, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
Autocalculate, !- View Factor to Ground
4, !- Number of Vertices
4,14,0, !- X,Y,Z ==> Vertex 1 {m}
4,8,0, !- X,Y,Z ==> Vertex 2 {m}
0,8,0, !- X,Y,Z ==> Vertex 3 {m}
0,14,0; !- X,Y,Z ==> Vertex 4 {m}
Construction,
Piso, !- Name
PisoCeramico_10mm, !- Outside Layer
Argamassa, !- Layer 2
LajePiso_100mm; !- Layer 3
Material,
PisoCeramico_10mm, !- Name
Smooth, !- Roughness
0.01, !- Thickness {m}
0.9, !- Conductivity {W/m-K}
1600, !- Density {kg/m3}
920, !- Specific Heat {J/kg-K}
0.9, !- Thermal Absorptance
0.73, !- Solar Absorptance
0.7; !- Visible Absorptance
Material,
Argamassa, !- Name
Rough, !- Roughness
0.025, !- Thickness {m}
1.15, !- Conductivity {W/m-K}
2000, !- Density {kg/m3}
1000, !- Specific Heat {J/kg-K}
0.9, !- Thermal Absorptance
0.4, !- Solar Absorptance
0.7; !- Visible Absorptance
Material,
LajePiso_100mm, !- Name
Rough, !- Roughness
0.1, !- Thickness {m}
1.75, !- Conductivity {W/m-K}
2400, !- Density {kg/m3}
1000, !- Specific Heat {J/kg-K}
0.9, !- Thermal Absorptance
0.73, !- Solar Absorptance
0.7; !- Visible Absorptance
BuildingSurface:Detailed,
Z3|_Par3, !- Name
WALL, !- Surface Type
ParedeInterna, !- Construction Name
Z3, !- Zone Name
Surface, !- Outside Boundary Condition
Z2|Z3_Par3, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
Autocalculate, !- View Factor to Ground
4, !- Number of Vertices
0,8,3, !- X,Y,Z ==> Vertex 1 {m}
0,8,0, !- X,Y,Z ==> Vertex 2 {m}
4,8,0, !- X,Y,Z ==> Vertex 3 {m}
4,8,3; !- X,Y,Z ==> Vertex 4 {m}
Construction,
ParedeInterna, !- Name
Argamassa, !- Outside Layer
Tijolo_90mm, !- Layer 2
CamaraAr_2cm_5cm, !- Layer 3
Tijolo_90mm, !- Layer 4
Argamassa; !- Layer 5
Material,
Tijolo_90mm, !- Name
MediumRough, !- Roughness
0.014, !- Thickness {m}
0.9, !- Conductivity {W/m-K}
2290, !- Density {kg/m3}
920, !- Specific Heat {J/kg-K}
0.9, !- Thermal Absorptance
0.73, !- Solar Absorptance
0.7; !- Visible Absorptance
Material:AirGap,
CamaraAr_2cm_5cm, !- Name
0.16; !- Thermal Resistance {m2-K/W}
BuildingSurface:Detailed,
Z3|_Par2, !- Name
WALL, !- Surface Type
ParedeExterna, !- Construction Name
Z3, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
Autocalculate, !- View Factor to Ground
4, !- Number of Vertices
4,8,3, !- X,Y,Z ==> Vertex 1 {m}
4,8,0, !- X,Y,Z ==> Vertex 2 {m}
4,14,0, !- X,Y,Z ==> Vertex 3 {m}
4,14,3; !- X,Y,Z ==> Vertex 4 {m}
Construction,
ParedeExterna, !- Name
Argamassa, !- Outside Layer
Tijolo_140mm, !- Layer 2
CamaraAr_2cm_5cm, !- Layer 3
Tijolo_140mm, !- Layer 4
Argamassa; !- Layer 5
Material,
Tijolo_140mm, !- Name
MediumRough, !- Roughness
0.014, !- Thickness {m}
0.9, !- Conductivity {W/m-K}
2252, !- Density {kg/m3}
920, !- Specific Heat {J/kg-K}
0.9, !- Thermal Absorptance
0.73, !- Solar Absorptance
0.7; !- Visible Absorptance
BuildingSurface:Detailed,
Z3|_Par4, !- Name
WALL, !- Surface Type
ParedeExterna, !- Construction Name
Z3, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
Autocalculate, !- View Factor to Ground
4, !- Number of Vertices
0,14,3, !- X,Y,Z ==> Vertex 1 {m}
0,14,0, !- X,Y,Z ==> Vertex 2 {m}
0,8,0, !- X,Y,Z ==> Vertex 3 {m}
0,8,3; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Z3|_Par1, !- Name
WALL, !- Surface Type
ParedeExterna, !- Construction Name
Z3, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
Autocalculate, !- View Factor to Ground
4, !- Number of Vertices
4,14,3, !- X,Y,Z ==> Vertex 1 {m}
4,14,0, !- X,Y,Z ==> Vertex 2 {m}
0,14,0, !- X,Y,Z ==> Vertex 3 {m}
0,14,3; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Z3|_Par3_Port1, !- Name
GLASSDOOR, !- Surface Type
Porta_Interna, !- Construction Name
Z3|_Par3, !- Building Surface Name
Z2_Par1_Port1, !- Outside Boundary Condition Object
Autocalculate, !- View Factor to Ground
, !- Shading Control Name
, !- Frame and Divider Name
1, !- Multiplier
4, !- Number of Vertices
1.6,8,2.1, !- X,Y,Z ==> Vertex 1 {m}
1.6,8,0, !- X,Y,Z ==> Vertex 2 {m}
2.4,8,0, !- X,Y,Z ==> Vertex 3 {m}
2.4,8,2.1; !- X,Y,Z ==> Vertex 4 {m}
Construction,
Porta_Interna, !- Name
Madeira, !- Outside Layer
CamaraAr_2cm_5cm, !- Layer 2
Madeira; !- Layer 3
Material,
Madeira, !- Name
Smooth, !- Roughness
0.05, !- Thickness {m}
0.23, !- Conductivity {W/m-K}
600, !- Density {kg/m3}
1304, !- Specific Heat {J/kg-K}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.7; !- Visible Absorptance
FenestrationSurface:Detailed,
Z3|_Par1_Jan1, !- Name
WINDOW, !- Surface Type
Janela, !- Construction Name
Z3|_Par1, !- Building Surface Name
, !- Outside Boundary Condition Object
Autocalculate, !- View Factor to Ground
, !- Shading Control Name
, !- Frame and Divider Name
1, !- Multiplier
4, !- Number of Vertices
3.95,14,2.1, !- X,Y,Z ==> Vertex 1 {m}
3.95,14,0.6, !- X,Y,Z ==> Vertex 2 {m}
0.05,14,0.6, !- X,Y,Z ==> Vertex 3 {m}
0.05,14,2.1; !- X,Y,Z ==> Vertex 4 {m}
Construction,
Janela, !- Name
VidroSimples_3mm; !- Outside Layer
WindowMaterial:Glazing,
VidroSimples_3mm, !- Name
SpectralAverage, !- Optical Data Type
, !- Window Glass Spectral Data Set Name
0.003, !- Thickness {m}
0.837, !- Solar Transmittance at Normal Incidence
0.075, !- Front Side Solar Reflectance at Normal Incidence
0.075, !- Back Side Solar Reflectance at Normal Incidence
0.898, !- Visible Transmittance at Normal Incidence
0.081, !- Front Side Visible Reflectance at Normal Incidence
0.081, !- Back Side Visible Reflectance at Normal Incidence
0, !- Infrared Transmittance at Normal Incidence
0.84, !- Front Side Infrared Hemispherical Emissivity
0.84, !- Back Side Infrared Hemispherical Emissivity
0.9, !- Conductivity {W/m-K}
1, !- Dirt Correction Factor for Solar and Visible Transmittance
No, !- Solar Diffusing
72000000000, !- Youngs modulus {Pa}
0.22; !- Poissons ratio
BuildingSurface:Detailed,
Z2|_Teto, !- Name
Roof, !- Surface Type
Telhado, !- Construction Name
Z2, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
Autocalculate, !- View Factor to Ground
4, !- Number of Vertices
0,8,3, !- X,Y,Z ==> Vertex 1 {m}
0,6,3, !- X,Y,Z ==> Vertex 2 {m}
4,6,3, !- X,Y,Z ==> Vertex 3 {m}
4,8,3; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Z2|_Piso, !- Name
Floor, !- Surface Type
Piso, !- Construction Name
Z2, !- Zone Name
Ground, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
Autocalculate, !- View Factor to Ground
4, !- Number of Vertices
4,8,0, !- X,Y,Z ==> Vertex 1 {m}
4,6,0, !- X,Y,Z ==> Vertex 2 {m}
0,6,0, !- X,Y,Z ==> Vertex 3 {m}
0,8,0; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Z2|_Par2, !- Name
WALL, !- Surface Type
ParedeExterna, !- Construction Name
Z2, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
Autocalculate, !- View Factor to Ground
4, !- Number of Vertices
4,6,3, !- X,Y,Z ==> Vertex 1 {m}
4,6,0, !- X,Y,Z ==> Vertex 2 {m}
4,8,0, !- X,Y,Z ==> Vertex 3 {m}
4,8,3; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Z2|_Par3, !- Name
WALL, !- Surface Type
ParedeInterna, !- Construction Name
Z2, !- Zone Name
Surface, !- Outside Boundary Condition
Z1|Z2_Par3, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
Autocalculate, !- View Factor to Ground
4, !- Number of Vertices
0,6,3, !- X,Y,Z ==> Vertex 1 {m}
0,6,0, !- X,Y,Z ==> Vertex 2 {m}
4,6,0, !- X,Y,Z ==> Vertex 3 {m}
4,6,3; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Z2|_Par4, !- Name
WALL, !- Surface Type
ParedeExterna, !- Construction Name
Z2, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
Autocalculate, !- View Factor to Ground
4, !- Number of Vertices
0,8,3, !- X,Y,Z ==> Vertex 1 {m}
0,8,0, !- X,Y,Z ==> Vertex 2 {m}
0,6,0, !- X,Y,Z ==> Vertex 3 {m}
0,6,3; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Z2|Z3_Par3, !- Name
WALL, !- Surface Type
ParedeInterna, !- Construction Name
Z2, !- Zone Name
Surface, !- Outside Boundary Condition
Z3|_Par3, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
Autocalculate, !- View Factor to Ground
4, !- Number of Vertices
0,8,3, !- X,Y,Z ==> Vertex 1 {m}
0,8,0, !- X,Y,Z ==> Vertex 2 {m}
4,8,0, !- X,Y,Z ==> Vertex 3 {m}
4,8,3; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Z2|_Par1_Port1, !- Name
GLASSDOOR, !- Surface Type
Porta_Interna, !- Construction Name
Z2|Z3_Par3, !- Building Surface Name
Z3_Par3_Port1, !- Outside Boundary Condition Object
Autocalculate, !- View Factor to Ground
, !- Shading Control Name
, !- Frame and Divider Name
1, !- Multiplier
4, !- Number of Vertices
1.6,10,2.1, !- X,Y,Z ==> Vertex 1 {m}
1.6,10,0, !- X,Y,Z ==> Vertex 2 {m}
2.4,10,0, !- X,Y,Z ==> Vertex 3 {m}
2.4,10,2.1; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Z2|_Par3_Port1, !- Name
GLASSDOOR, !- Surface Type
Porta_Interna, !- Construction Name
Z2|_Par3, !- Building Surface Name
Z1_Par1_Port1, !- Outside Boundary Condition Object
Autocalculate, !- View Factor to Ground
, !- Shading Control Name
, !- Frame and Divider Name
1, !- Multiplier
4, !- Number of Vertices
1.6,6,2.1, !- X,Y,Z ==> Vertex 1 {m}
1.6,6,0, !- X,Y,Z ==> Vertex 2 {m}
2.4,6,0, !- X,Y,Z ==> Vertex 3 {m}
2.4,6,2.1; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Z1|_Teto, !- Name
Roof, !- Surface Type
Telhado, !- Construction Name
Z1, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
Autocalculate, !- View Factor to Ground
4, !- Number of Vertices
0,6,3, !- X,Y,Z ==> Vertex 1 {m}
0,0,3, !- X,Y,Z ==> Vertex 2 {m}
4,0,3, !- X,Y,Z ==> Vertex 3 {m}
4,6,3; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Z1|_Piso, !- Name
Floor, !- Surface Type
Piso, !- Construction Name
Z1, !- Zone Name
Ground, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
Autocalculate, !- View Factor to Ground
4, !- Number of Vertices
4,6,0, !- X,Y,Z ==> Vertex 1 {m}
4,0,0, !- X,Y,Z ==> Vertex 2 {m}
0,0,0, !- X,Y,Z ==> Vertex 3 {m}
0,6,0; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Z1|_Par4, !- Name
WALL, !- Surface Type
ParedeExterna, !- Construction Name
Z1, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
Autocalculate, !- View Factor to Ground
4, !- Number of Vertices
0,6,3, !- X,Y,Z ==> Vertex 1 {m}
0,6,0, !- X,Y,Z ==> Vertex 2 {m}
0,0,0, !- X,Y,Z ==> Vertex 3 {m}
0,0,3; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Z1|_Par3, !- Name
WALL, !- Surface Type
ParedeExterna, !- Construction Name
Z1, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
Autocalculate, !- View Factor to Ground
4, !- Number of Vertices
0,0,3, !- X,Y,Z ==> Vertex 1 {m}
0,0,0, !- X,Y,Z ==> Vertex 2 {m}
4,0,0, !- X,Y,Z ==> Vertex 3 {m}
4,0,3; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Z1|Z2_Par3, !- Name
WALL, !- Surface Type
ParedeInterna, !- Construction Name
Z1, !- Zone Name
Surface, !- Outside Boundary Condition
Z2|_Par3, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
Autocalculate, !- View Factor to Ground
4, !- Number of Vertices
0,6,3, !- X,Y,Z ==> Vertex 1 {m}
0,6,0, !- X,Y,Z ==> Vertex 2 {m}
4,6,0, !- X,Y,Z ==> Vertex 3 {m}
4,6,3; !- X,Y,Z ==> Vertex 4 {m}
BuildingSurface:Detailed,
Z1|_Par2, !- Name
WALL, !- Surface Type
ParedeExterna, !- Construction Name
Z1, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
Autocalculate, !- View Factor to Ground
4, !- Number of Vertices
4,0,3, !- X,Y,Z ==> Vertex 1 {m}
4,0,0, !- X,Y,Z ==> Vertex 2 {m}
4,6,0, !- X,Y,Z ==> Vertex 3 {m}
4,6,3; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Z1|_Par1_Port1, !- Name
GLASSDOOR, !- Surface Type
Porta_Interna, !- Construction Name
Z1|Z2_Par3, !- Building Surface Name
Z2_Par3_Port1, !- Outside Boundary Condition Object
Autocalculate, !- View Factor to Ground
, !- Shading Control Name
, !- Frame and Divider Name
1, !- Multiplier
4, !- Number of Vertices
1.6,12,2.1, !- X,Y,Z ==> Vertex 1 {m}
1.6,12,0, !- X,Y,Z ==> Vertex 2 {m}
2.4,12,0, !- X,Y,Z ==> Vertex 3 {m}
2.4,12,2.1; !- X,Y,Z ==> Vertex 4 {m}
FenestrationSurface:Detailed,
Z1|_Par3_Jan1, !- Name
WINDOW, !- Surface Type
Janela, !- Construction Name
Z1|_Par3, !- Building Surface Name
, !- Outside Boundary Condition Object
Autocalculate, !- View Factor to Ground
, !- Shading Control Name
, !- Frame and Divider Name
1, !- Multiplier
4, !- Number of Vertices
0.05,0,2.1, !- X,Y,Z ==> Vertex 1 {m}
0.05,0,0.6, !- X,Y,Z ==> Vertex 2 {m}
3.95,0,0.6, !- X,Y,Z ==> Vertex 3 {m}
3.95,0,2.1; !- X,Y,Z ==> Vertex 4 {m}
Zone,
Z3, !- Name
0, !- Direction of Relative North {deg}
0, !- X Origin {m}
8, !- Y Origin {m}
0, !- Z Origin {m}
1, !- Type
1, !- Multiplier
Autocalculate, !- Ceiling Height {m}
Autocalculate, !- Volume {m3}
Autocalculate, !- Floor Area {m2}
, !- Zone Inside Convection Algorithm
, !- Zone Outside Convection Algorithm
Yes; !- Part of Total Floor Area
Zone,
Z2, !- Name
0, !- Direction of Relative North {deg}
0, !- X Origin {m}
6, !- Y Origin {m}
0, !- Z Origin {m}
1, !- Type
1, !- Multiplier
Autocalculate, !- Ceiling Height {m}
Autocalculate, !- Volume {m3}
Autocalculate, !- Floor Area {m2}
, !- Zone Inside Convection Algorithm
, !- Zone Outside Convection Algorithm
Yes; !- Part of Total Floor Area
Zone,
Z1, !- Name
0, !- Direction of Relative North {deg}
0, !- X Origin {m}
0, !- Y Origin {m}
0, !- Z Origin {m}
1, !- Type
1, !- Multiplier
Autocalculate, !- Ceiling Height {m}
Autocalculate, !- Volume {m3}
Autocalculate, !- Floor Area {m2}
, !- Zone Inside Convection Algorithm
, !- Zone Outside Convection Algorithm
Yes; !- Part of Total Floor Area
SimulationControl,
No, !- Do Zone Sizing Calculation
No, !- Do System Sizing Calculation
No, !- Do Plant Sizing Calculation
No, !- Run Simulation for Sizing Periods
Yes; !- Run Simulation for Weather File Run Periods
Timestep,4;
RunPeriod,
Smpl_RunPeriod_FullYear, !- Name
1, !- Begin Month
1, !- Begin Day of Month
12, !- End Month
31, !- End Day of Month
UseWeatherFile, !- Day of Week for Start Day
Yes, !- Use Weather File Holidays and Special Days
Yes, !- Use Weather File Daylight Saving Period
No, !- Apply Weekend Holiday Rule
Yes, !- Use Weather File Rain Indicators
Yes, !- Use Weather File Snow Indicators
1, !- Number of Times Runperiod to be Repeated
yes; !- Increment Day of Week on repeat
Sizing:Parameters,
1.5, !- Heating Sizing Factor
1.5; !- Cooling Sizing Factor
Version,8.1.0;
Output:Diagnostics,
DisplayExtraWarnings, !- Key 1
DisplayAdvancedReportVariables; !- Key 2
Output:Table:SummaryReports,
ComponentSizingSummary, !- Report 1 Name
AnnualBuildingUtilityPerformanceSummary, !- Report 2 Name
HVACSizingSummary, !- Report 3 Name
InputVerificationandResultsSummary, !- Report 4 Name
ClimaticDataSummary, !- Report 5 Name
DemandEndUseComponentsSummary, !- Report 6 Name
EquipmentSummary, !- Report 7 Name
EnvelopeSummary, !- Report 8 Name
ShadingSummary, !- Report 9 Name
SurfaceShadowingSummary, !- Report 10 Name
LightingSummary, !- Report 11 Name
SystemSummary; !- Report 12 Name
Output:Table:Monthly,
Unmet Htg Hours, !- Name
0, !- Digits After Decimal
Zone Heating Setpoint Not Met Time, !- Variable or Meter 1 Name
SumOrAverage; !- Aggregation Type for Variable or Meter 1
Output:Table:Monthly,
Unmet CLG Hours, !- Name
0, !- Digits After Decimal
Zone Heating Setpoint Not Met Time, !- Variable or Meter 1 Name
SumOrAverage; !- Aggregation Type for Variable or Meter 1
Output:Table:Monthly,
Site Profile Summary, !- Name
2, !- Digits After Decimal
Site Outdoor Air Drybulb Temperature, !- Variable or Meter 1 Name
SumOrAverage, !- Aggregation Type for Variable or Meter 1
CoolingCoils:EnergyTransfer, !- Variable or Meter 2 Name
SumOrAverage, !- Aggregation Type for Variable or Meter 2
HeatingCoils:EnergyTransfer, !- Variable or Meter 3 Name
SumOrAverage; !- Aggregation Type for Variable or Meter 3
Output:Table:Monthly,
Water Summary, !- Name
2, !- Digits After Decimal
Site Precipitation Depth, !- Variable or Meter 1 Name
SumOrAverage; !- Aggregation Type for Variable or Meter 1
Output:Table:Monthly,
MonthlyElectircalConsumptionAndDemand, !- Name
3, !- Digits After Decimal
ElectricityNet:Facility, !- Variable or Meter 1 Name
SumOrAverage, !- Aggregation Type for Variable or Meter 1
ElectricityNet:Facility, !- Variable or Meter 2 Name
Maximum; !- Aggregation Type for Variable or Meter 2
Output:Table:Monthly,
SETPOINTSNOTMETWITHTEMPERATURESMONTHLY, !- Name
2, !- Digits After Decimal
Zone Heating Setpoint Not Met Time, !- Variable or Meter 1 Name
HoursNonZero, !- Aggregation Type for Variable or Meter 1
Zone Heating Setpoint Not Met While Occupied Time, !- Variable or Meter 2 Name
HoursNonZero, !- Aggregation Type for Variable or Meter 2
Zone Cooling Setpoint Not Met Time, !- Variable or Meter 3 Name
HoursNonZero, !- Aggregation Type for Variable or Meter 3
Zone Cooling Setpoint Not Met While Occupied Time, !- Variable or Meter 4 Name
HoursNonZero; !- Aggregation Type for Variable or Meter 4
Output:Table:TimeBins,
*, !- Key Value
Chiller Condenser Outlet Temperature, !- Variable Name
10, !- Interval Start
3, !- Interval Size
9, !- Interval Count
, !- Schedule Name
Temperature; !- Variable Type
Output:Table:TimeBins,
*, !- Key Value
Zone Air Relative Humidity, !- Variable Name
30, !- Interval Start
4, !- Interval Size
10; !- Interval Count
Output:Table:TimeBins,
*, !- Key Value
Zone Mean Air Temperature, !- Variable Name
10, !- Interval Start
3, !- Interval Size
9, !- Interval Count
, !- Schedule Name
Temperature; !- Variable Type
Output:Meter,PlantLoopHeatingDemand:Facility,Hourly;
Output:Meter,PlantLoopCoolingDemand:Facility,Hourly;
Output:Variable,*,Site Outdoor Air Drybulb Temperature,Hourly;
Output:SQLite,
SimpleAndTabular; !- Option Type
OutputControl:Table:Style,
CommaAndHTML, !- Column Separator
None; !- Unit Conversion
Output:Table:TimeBins,
*, !- Key Value
Chiller Condenser Outlet Temperature, !- Variable Name
10, !- Interval Start
3, !- Interval Size
9, !- Interval Count
, !- Schedule Name
Temperature; !- Variable Type
Output:Table:TimeBins,
*, !- Key Value
Zone Air Relative Humidity, !- Variable Name
30, !- Interval Start
4, !- Interval Size
10; !- Interval Count
Output:Table:TimeBins,
*, !- Key Value
Zone Mean Air Temperature, !- Variable Name
10, !- Interval Start
3, !- Interval Size
9, !- Interval Count
, !- Schedule Name
Temperature; !- Variable Type
Output:Meter,PlantLoopHeatingDemand:Facility,Hourly;
Output:Meter,PlantLoopCoolingDemand:Facility,Hourly;
Output:Variable,*,Site Outdoor Air Drybulb Temperature,Hourly;
-------------- next part --------------
!-Generator IDFEditor 1.44
!-Option SortedOrder
!-NOTE: All comments with '!-' are ignored by the IDFEditor and are generated automatically.
!- Use '!' comments if they need to be retained when using the IDFEditor.
!- =========== ALL OBJECTS IN CLASS: VERSION ===========
! Minimal.idf
! Basic file description: This is a minimal configuration necessary to run.
! Highlights: Illustrates minimal items necessary to perform run.
! BUILDING, SURFACEGEOMETRY, LOCATION and DESIGNDAY (or RUNPERIOD) are the absolute minimal required input objects.
! TIME STEP IN HOUR is included so as to not get warning error.
! Including two design days, Run Control object and RunPeriod to facilitate use.
! Although not incredibly useful, this could be used as a weather/solar calculator.
! Simulation Location/Run: Denver is included. Any could be used.
! Building: None.
!
! Internal gains description: None.
!
! HVAC: None.
!
Version,
8.1; !- Version Identifier
!- =========== ALL OBJECTS IN CLASS: SIMULATIONCONTROL ===========
SimulationControl,
No, !- Do Zone Sizing Calculation
No, !- Do System Sizing Calculation
No, !- Do Plant Sizing Calculation
No, !- Run Simulation for Sizing Periods
Yes; !- Run Simulation for Weather File Run Periods
!- =========== ALL OBJECTS IN CLASS: BUILDING ===========
Building,
Trab03, !- Name
0.0, !- North Axis {deg}
City, !- Terrain
0.04, !- Loads Convergence Tolerance Value
0.4, !- Temperature Convergence Tolerance Value {deltaC}
FullInteriorAndExterior, !- Solar Distribution
25, !- Maximum Number of Warmup Days
; !- Minimum Number of Warmup Days
!- =========== ALL OBJECTS IN CLASS: TIMESTEP ===========
Timestep,
4; !- Number of Timesteps per Hour
!- =========== ALL OBJECTS IN CLASS: SITE:LOCATION ===========
Site:Location,
Vicosa, !- Name
-20.77, !- Latitude {deg}
-42.87, !- Longitude {deg}
-3.0, !- Time Zone {hr}
712.2; !- Elevation {m}
!- =========== ALL OBJECTS IN CLASS: SIZINGPERIOD:WEATHERFILEDAYS ===========
SizingPeriod:WeatherFileDays,
Vicosa_DiaProjeto, !- Name
1, !- Begin Month
1, !- Begin Day of Month
12, !- End Month
31, !- End Day of Month
Wednesday, !- Day of Week for Start Day
Yes, !- Use Weather File Daylight Saving Period
Yes; !- Use Weather File Rain and Snow Indicators
!- =========== ALL OBJECTS IN CLASS: RUNPERIOD ===========
RunPeriod,
AnoCompleto, !- Name
1, !- Begin Month
1, !- Begin Day of Month
12, !- End Month
31, !- End Day of Month
UseWeatherFile, !- Day of Week for Start Day
No, !- Use Weather File Holidays and Special Days
No, !- Use Weather File Daylight Saving Period
No, !- Apply Weekend Holiday Rule
No, !- Use Weather File Rain Indicators
No, !- Use Weather File Snow Indicators
1, !- Number of Times Runperiod to be Repeated
No; !- Increment Day of Week on repeat
!- =========== ALL OBJECTS IN CLASS: SITE:GROUNDTEMPERATURE:BUILDINGSURFACE ===========
Site:GroundTemperature:BuildingSurface,
22.72, !- January Ground Temperature {C}
22.13, !- February Ground Temperature {C}
20.98, !- March Ground Temperature {C}
19.9, !- April Ground Temperature {C}
17.86, !- May Ground Temperature {C}
16.79, !- June Ground Temperature {C}
16.51, !- July Ground Temperature {C}
17.07, !- August Ground Temperature {C}
18.34, !- September Ground Temperature {C}
19.91, !- October Ground Temperature {C}
21.45, !- November Ground Temperature {C}
22.46; !- December Ground Temperature {C}
!- =========== ALL OBJECTS IN CLASS: SCHEDULETYPELIMITS ===========
ScheduleTypeLimits,
Qualquer, !- Name
0, !- Lower Limit Value
10000, !- Upper Limit Value
Continuous, !- Numeric Type
Dimensionless; !- Unit Type
ScheduleTypeLimits,
Taxas_metabolicas, !- Name
50, !- Lower Limit Value
500, !- Upper Limit Value
Continuous, !- Numeric Type
ActivityLevel; !- Unit Type
!- =========== ALL OBJECTS IN CLASS: SCHEDULE:COMPACT ===========
Schedule:Compact,
Sch_AlwaysOn, !- Name
Qualquer, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: AllDays, !- Field 2
Until: 24:00, !- Field 3
1.0; !- Field 4
Schedule:Compact,
Sch_Ocupacao, !- Name
Qualquer, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For:Weekdays, !- Field 2
Until: 08:00, !- Field 3
0, !- Field 4
Until: 12:00, !- Field 5
1, !- Field 6
Until: 14:00, !- Field 7
.5, !- Field 8
Until: 18:00, !- Field 9
1, !- Field 10
Until: 24:00, !- Field 11
0, !- Field 12
For: Allotherdays, !- Field 13
Until: 24:00, !- Field 14
0; !- Field 15
Schedule:Compact,
Sch_Iluminacao, !- Name
Qualquer, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For:Weekdays, !- Field 2
Until: 08:00, !- Field 3
.25, !- Field 4
Until: 12:00, !- Field 5
1, !- Field 6
Until: 14:00, !- Field 7
.5, !- Field 8
Until: 18:00, !- Field 9
1, !- Field 10
Until: 24:00, !- Field 11
.25, !- Field 12
For: Allotherdays, !- Field 13
Until: 24:00, !- Field 14
.25; !- Field 15
Schedule:Compact,
Sch_Infiltracao, !- Name
Qualquer, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Weekdays, !- Field 2
Until: 08:00, !- Field 3
0, !- Field 4
Until: 18:00, !- Field 5
1, !- Field 6
Until: 24:00, !- Field 7
0, !- Field 8
For: Allotherdays, !- Field 9
Until: 24:00, !- Field 10
0; !- Field 11
Schedule:Compact,
Sch_Metabolismo, !- Name
Taxas_metabolicas, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For: Alldays, !- Field 2
Until: 24:00, !- Field 3
130; !- Field 4
Schedule:Compact,
Sch_Equipamentos, !- Name
Qualquer, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For:Weekdays, !- Field 2
Until: 08:00, !- Field 3
0, !- Field 4
Until: 18:00, !- Field 5
1, !- Field 6
Until: 24:00, !- Field 7
0, !- Field 8
For: Allotherdays, !- Field 9
Until: 24:00, !- Field 10
0; !- Field 11
Schedule:Compact,
Sch_HVAC, !- Name
Qualquer, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For:Weekdays, !- Field 2
Until: 08:00, !- Field 3
0, !- Field 4
Until: 18:00, !- Field 5
1, !- Field 6
Until: 24:00, !- Field 7
0, !- Field 8
For: Allotherdays, !- Field 9
Until: 24:00, !- Field 10
0; !- Field 11
Schedule:Compact,
Sch_Continuous, !- Name
Qualquer, !- Schedule Type Limits Name
Through: 12/31, !- Field 1
For:Weekdays, !- Field 2
Until: 08:00, !- Field 3
0, !- Field 4
Until: 18:00, !- Field 5
1, !- Field 6
Until: 24:00, !- Field 7
0, !- Field 8
For: Allotherdays, !- Field 9
Until: 24:00, !- Field 10
0; !- Field 11
!- =========== ALL OBJECTS IN CLASS: MATERIAL ===========
Material,
Argamassa, !- Name
Rough, !- Roughness
0.025, !- Thickness {m}
1.15, !- Conductivity {W/m-K}
2000, !- Density {kg/m3}
1000, !- Specific Heat {J/kg-K}
0.9, !- Thermal Absorptance
0.4, !- Solar Absorptance
0.7; !- Visible Absorptance
Material,
Tijolo_90mm, !- Name
MediumRough, !- Roughness
0.014, !- Thickness {m}
0.9, !- Conductivity {W/m-K}
2290, !- Density {kg/m3}
920, !- Specific Heat {J/kg-K}
0.9, !- Thermal Absorptance
0.73, !- Solar Absorptance
0.7; !- Visible Absorptance
Material,
Tijolo_140mm, !- Name
MediumRough, !- Roughness
0.014, !- Thickness {m}
0.9, !- Conductivity {W/m-K}
2252, !- Density {kg/m3}
920, !- Specific Heat {J/kg-K}
0.9, !- Thermal Absorptance
0.73, !- Solar Absorptance
0.7; !- Visible Absorptance
Material,
Telha_10mm, !- Name
MediumRough, !- Roughness
0.01, !- Thickness {m}
1.05, !- Conductivity {W/m-K}
2000, !- Density {kg/m3}
920, !- Specific Heat {J/kg-K}
0.9, !- Thermal Absorptance
0.73, !- Solar Absorptance
0.7; !- Visible Absorptance
Material,
LajeCob_120mm, !- Name
Rough, !- Roughness
0.095, !- Thickness {m}
1.05, !- Conductivity {W/m-K}
1087, !- Density {kg/m3}
920, !- Specific Heat {J/kg-K}
0.9, !- Thermal Absorptance
0.73, !- Solar Absorptance
0.7; !- Visible Absorptance
Material,
LajePiso_100mm, !- Name
Rough, !- Roughness
0.1, !- Thickness {m}
1.75, !- Conductivity {W/m-K}
2400, !- Density {kg/m3}
1000, !- Specific Heat {J/kg-K}
0.9, !- Thermal Absorptance
0.73, !- Solar Absorptance
0.7; !- Visible Absorptance
Material,
PisoCeramico_10mm, !- Name
Smooth, !- Roughness
0.01, !- Thickness {m}
0.9, !- Conductivity {W/m-K}
1600, !- Density {kg/m3}
920, !- Specific Heat {J/kg-K}
0.9, !- Thermal Absorptance
0.73, !- Solar Absorptance
0.7; !- Visible Absorptance
Material,
Madeira, !- Name
Smooth, !- Roughness
0.05, !- Thickness {m}
0.23, !- Conductivity {W/m-K}
600, !- Density {kg/m3}
1304, !- Specific Heat {J/kg-K}
0.9, !- Thermal Absorptance
0.7, !- Solar Absorptance
0.7; !- Visible Absorptance
!- =========== ALL OBJECTS IN CLASS: MATERIAL:AIRGAP ===========
Material:AirGap,
CamaraAr_5cm, !- Name
0.21; !- Thermal Resistance {m2-K/W}
Material:AirGap,
CamaraAr_2cm_5cm, !- Name
0.16; !- Thermal Resistance {m2-K/W}
!- =========== ALL OBJECTS IN CLASS: WINDOWMATERIAL:GLAZING ===========
WindowMaterial:Glazing,
VidroSimples_3mm, !- Name
SpectralAverage, !- Optical Data Type
, !- Window Glass Spectral Data Set Name
0.003, !- Thickness {m}
0.837, !- Solar Transmittance at Normal Incidence
0.075, !- Front Side Solar Reflectance at Normal Incidence
0.075, !- Back Side Solar Reflectance at Normal Incidence
0.898, !- Visible Transmittance at Normal Incidence
0.081, !- Front Side Visible Reflectance at Normal Incidence
0.081, !- Back Side Visible Reflectance at Normal Incidence
0, !- Infrared Transmittance at Normal Incidence
0.84, !- Front Side Infrared Hemispherical Emissivity
0.84, !- Back Side Infrared Hemispherical Emissivity
0.9; !- Conductivity {W/m-K}
!- =========== ALL OBJECTS IN CLASS: CONSTRUCTION ===========
Construction,
Telhado, !- Name
Telha_10mm, !- Outside Layer
CamaraAr_5cm, !- Layer 2
LajeCob_120mm; !- Layer 3
Construction,
ParedeExterna, !- Name
Argamassa, !- Outside Layer
Tijolo_140mm, !- Layer 2
CamaraAr_2cm_5cm, !- Layer 3
Tijolo_140mm, !- Layer 4
Argamassa; !- Layer 5
Construction,
ParedeInterna, !- Name
Argamassa, !- Outside Layer
Tijolo_90mm, !- Layer 2
CamaraAr_2cm_5cm, !- Layer 3
Tijolo_90mm, !- Layer 4
Argamassa; !- Layer 5
Construction,
Janela, !- Name
VidroSimples_3mm; !- Outside Layer
Construction,
Piso, !- Name
PisoCeramico_10mm, !- Outside Layer
Argamassa, !- Layer 2
LajePiso_100mm; !- Layer 3
Construction,
Porta_Interna, !- Name
Madeira, !- Outside Layer
CamaraAr_2cm_5cm, !- Layer 2
Madeira; !- Layer 3
!- =========== ALL OBJECTS IN CLASS: GLOBALGEOMETRYRULES ===========
GlobalGeometryRules,
UpperLeftCorner, !- Starting Vertex Position
CounterClockWise, !- Vertex Entry Direction
Relative; !- Coordinate System
!- =========== ALL OBJECTS IN CLASS: ZONE ===========
Zone,
Z1, !- Name
0, !- Direction of Relative North {deg}
0, !- X Origin {m}
0, !- Y Origin {m}
0, !- Z Origin {m}
, !- Type
1; !- Multiplier
Zone,
Z2, !- Name
0, !- Direction of Relative North {deg}
0, !- X Origin {m}
6, !- Y Origin {m}
0, !- Z Origin {m}
, !- Type
1; !- Multiplier
Zone,
Z3, !- Name
0, !- Direction of Relative North {deg}
0, !- X Origin {m}
8, !- Y Origin {m}
0, !- Z Origin {m}
, !- Type
1; !- Multiplier
!- =========== ALL OBJECTS IN CLASS: BUILDINGSURFACE:DETAILED ===========
BuildingSurface:Detailed,
Z1_Piso, !- Name
Floor, !- Surface Type
Piso, !- Construction Name
Z1, !- Zone Name
Ground, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
0.0, !- View Factor to Ground
4, !- Number of Vertices
4.000000000000, !- Vertex 1 X-coordinate {m}
6.000000000000, !- Vertex 1 Y-coordinate {m}
0.000000000000, !- Vertex 1 Z-coordinate {m}
4.000000000000, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
0.000000000000, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
0.000000000000, !- Vertex 4 X-coordinate {m}
6.000000000000, !- Vertex 4 Y-coordinate {m}
0.000000000000; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
Z1_Par2, !- Name
Wall, !- Surface Type
ParedeExterna, !- Construction Name
Z1, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
4.000000000000, !- Vertex 1 X-coordinate {m}
0.000000000000, !- Vertex 1 Y-coordinate {m}
3.000000000000, !- Vertex 1 Z-coordinate {m}
4.000000000000, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
4.000000000000, !- Vertex 3 X-coordinate {m}
6.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
4.000000000000, !- Vertex 4 X-coordinate {m}
6.000000000000, !- Vertex 4 Y-coordinate {m}
3.000000000000; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
Z1_Par1, !- Name
Wall, !- Surface Type
ParedeInterna, !- Construction Name
Z1, !- Zone Name
Surface, !- Outside Boundary Condition
Z2_Par3, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
4.000000000000, !- Vertex 1 X-coordinate {m}
6.000000000000, !- Vertex 1 Y-coordinate {m}
3.000000000000, !- Vertex 1 Z-coordinate {m}
4.000000000000, !- Vertex 2 X-coordinate {m}
6.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
0.000000000000, !- Vertex 3 X-coordinate {m}
6.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
0.000000000000, !- Vertex 4 X-coordinate {m}
6.000000000000, !- Vertex 4 Y-coordinate {m}
3.000000000000; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
Z1_Par3, !- Name
Wall, !- Surface Type
ParedeExterna, !- Construction Name
Z1, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
0.000000000000, !- Vertex 1 X-coordinate {m}
0.000000000000, !- Vertex 1 Y-coordinate {m}
3.000000000000, !- Vertex 1 Z-coordinate {m}
0.000000000000, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
4.000000000000, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
4.000000000000, !- Vertex 4 X-coordinate {m}
0.000000000000, !- Vertex 4 Y-coordinate {m}
3.000000000000; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
Z1_Par4, !- Name
Wall, !- Surface Type
ParedeExterna, !- Construction Name
Z1, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
0.000000000000, !- Vertex 1 X-coordinate {m}
6.000000000000, !- Vertex 1 Y-coordinate {m}
3.000000000000, !- Vertex 1 Z-coordinate {m}
0.000000000000, !- Vertex 2 X-coordinate {m}
6.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
0.000000000000, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
0.000000000000, !- Vertex 4 X-coordinate {m}
0.000000000000, !- Vertex 4 Y-coordinate {m}
3.000000000000; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
Z1_Teto, !- Name
Roof, !- Surface Type
Telhado, !- Construction Name
Z1, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
0.000000000000, !- Vertex 1 X-coordinate {m}
6.000000000000, !- Vertex 1 Y-coordinate {m}
3.000000000000, !- Vertex 1 Z-coordinate {m}
0.000000000000, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
3.000000000000, !- Vertex 2 Z-coordinate {m}
4.000000000000, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
3.000000000000, !- Vertex 3 Z-coordinate {m}
4.000000000000, !- Vertex 4 X-coordinate {m}
6.000000000000, !- Vertex 4 Y-coordinate {m}
3.000000000000; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
Z2_Piso, !- Name
Floor, !- Surface Type
Piso, !- Construction Name
Z2, !- Zone Name
Ground, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
0.0, !- View Factor to Ground
4, !- Number of Vertices
4.000000000000, !- Vertex 1 X-coordinate {m}
2.000000000000, !- Vertex 1 Y-coordinate {m}
0.000000000000, !- Vertex 1 Z-coordinate {m}
4.000000000000, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
0.000000000000, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
0.000000000000, !- Vertex 4 X-coordinate {m}
2.000000000000, !- Vertex 4 Y-coordinate {m}
0.000000000000; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
Z2_Par1, !- Name
Wall, !- Surface Type
ParedeInterna, !- Construction Name
Z2, !- Zone Name
Surface, !- Outside Boundary Condition
Z3_Par3, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
4.000000000000, !- Vertex 1 X-coordinate {m}
2.000000000000, !- Vertex 1 Y-coordinate {m}
3.000000000000, !- Vertex 1 Z-coordinate {m}
4.000000000000, !- Vertex 2 X-coordinate {m}
2.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
0.000000000000, !- Vertex 3 X-coordinate {m}
2.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
0.000000000000, !- Vertex 4 X-coordinate {m}
2.000000000000, !- Vertex 4 Y-coordinate {m}
3.000000000000; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
Z2_Teto, !- Name
Roof, !- Surface Type
Telhado, !- Construction Name
Z2, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
0.000000000000, !- Vertex 1 X-coordinate {m}
2.000000000000, !- Vertex 1 Y-coordinate {m}
3.000000000000, !- Vertex 1 Z-coordinate {m}
0.000000000000, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
3.000000000000, !- Vertex 2 Z-coordinate {m}
4.000000000000, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
3.000000000000, !- Vertex 3 Z-coordinate {m}
4.000000000000, !- Vertex 4 X-coordinate {m}
2.000000000000, !- Vertex 4 Y-coordinate {m}
3.000000000000; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
Z2_Par4, !- Name
Wall, !- Surface Type
ParedeExterna, !- Construction Name
Z2, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
0.000000000000, !- Vertex 1 X-coordinate {m}
2.000000000000, !- Vertex 1 Y-coordinate {m}
3.000000000000, !- Vertex 1 Z-coordinate {m}
0.000000000000, !- Vertex 2 X-coordinate {m}
2.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
0.000000000000, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
0.000000000000, !- Vertex 4 X-coordinate {m}
0.000000000000, !- Vertex 4 Y-coordinate {m}
3.000000000000; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
Z2_Par3, !- Name
Wall, !- Surface Type
ParedeInterna, !- Construction Name
Z2, !- Zone Name
Surface, !- Outside Boundary Condition
Z1_Par1, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
0.000000000000, !- Vertex 1 X-coordinate {m}
0.000000000000, !- Vertex 1 Y-coordinate {m}
3.000000000000, !- Vertex 1 Z-coordinate {m}
0.000000000000, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
4.000000000000, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
4.000000000000, !- Vertex 4 X-coordinate {m}
0.000000000000, !- Vertex 4 Y-coordinate {m}
3.000000000000; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
Z2_Par2, !- Name
Wall, !- Surface Type
ParedeExterna, !- Construction Name
Z2, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
4.000000000000, !- Vertex 1 X-coordinate {m}
0.000000000000, !- Vertex 1 Y-coordinate {m}
3.000000000000, !- Vertex 1 Z-coordinate {m}
4.000000000000, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
4.000000000000, !- Vertex 3 X-coordinate {m}
2.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
4.000000000000, !- Vertex 4 X-coordinate {m}
2.000000000000, !- Vertex 4 Y-coordinate {m}
3.000000000000; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
Z3_Piso, !- Name
Floor, !- Surface Type
Piso, !- Construction Name
Z3, !- Zone Name
Ground, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
0.0, !- View Factor to Ground
4, !- Number of Vertices
4.000000000000, !- Vertex 1 X-coordinate {m}
6.000000000000, !- Vertex 1 Y-coordinate {m}
0.000000000000, !- Vertex 1 Z-coordinate {m}
4.000000000000, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
0.000000000000, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
0.000000000000, !- Vertex 4 X-coordinate {m}
6.000000000000, !- Vertex 4 Y-coordinate {m}
0.000000000000; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
Z3_Par1, !- Name
Wall, !- Surface Type
ParedeExterna, !- Construction Name
Z3, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
4.000000000000, !- Vertex 1 X-coordinate {m}
6.000000000000, !- Vertex 1 Y-coordinate {m}
3.000000000000, !- Vertex 1 Z-coordinate {m}
4.000000000000, !- Vertex 2 X-coordinate {m}
6.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
0.000000000000, !- Vertex 3 X-coordinate {m}
6.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
0.000000000000, !- Vertex 4 X-coordinate {m}
6.000000000000, !- Vertex 4 Y-coordinate {m}
3.000000000000; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
Z3_Par4, !- Name
Wall, !- Surface Type
ParedeExterna, !- Construction Name
Z3, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
0.000000000000, !- Vertex 1 X-coordinate {m}
6.000000000000, !- Vertex 1 Y-coordinate {m}
3.000000000000, !- Vertex 1 Z-coordinate {m}
0.000000000000, !- Vertex 2 X-coordinate {m}
6.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
0.000000000000, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
0.000000000000, !- Vertex 4 X-coordinate {m}
0.000000000000, !- Vertex 4 Y-coordinate {m}
3.000000000000; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
Z3_Par2, !- Name
Wall, !- Surface Type
ParedeExterna, !- Construction Name
Z3, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
4.000000000000, !- Vertex 1 X-coordinate {m}
0.000000000000, !- Vertex 1 Y-coordinate {m}
3.000000000000, !- Vertex 1 Z-coordinate {m}
4.000000000000, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
4.000000000000, !- Vertex 3 X-coordinate {m}
6.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
4.000000000000, !- Vertex 4 X-coordinate {m}
6.000000000000, !- Vertex 4 Y-coordinate {m}
3.000000000000; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
Z3_Par3, !- Name
Wall, !- Surface Type
ParedeInterna, !- Construction Name
Z3, !- Zone Name
Surface, !- Outside Boundary Condition
Z2_Par1, !- Outside Boundary Condition Object
NoSun, !- Sun Exposure
NoWind, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
0.000000000000, !- Vertex 1 X-coordinate {m}
0.000000000000, !- Vertex 1 Y-coordinate {m}
3.000000000000, !- Vertex 1 Z-coordinate {m}
0.000000000000, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
4.000000000000, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
4.000000000000, !- Vertex 4 X-coordinate {m}
0.000000000000, !- Vertex 4 Y-coordinate {m}
3.000000000000; !- Vertex 4 Z-coordinate {m}
BuildingSurface:Detailed,
Z3_Teto, !- Name
Roof, !- Surface Type
Telhado, !- Construction Name
Z3, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
, !- View Factor to Ground
4, !- Number of Vertices
0.000000000000, !- Vertex 1 X-coordinate {m}
6.000000000000, !- Vertex 1 Y-coordinate {m}
3.000000000000, !- Vertex 1 Z-coordinate {m}
0.000000000000, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
3.000000000000, !- Vertex 2 Z-coordinate {m}
4.000000000000, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
3.000000000000, !- Vertex 3 Z-coordinate {m}
4.000000000000, !- Vertex 4 X-coordinate {m}
6.000000000000, !- Vertex 4 Y-coordinate {m}
3.000000000000; !- Vertex 4 Z-coordinate {m}
!- =========== ALL OBJECTS IN CLASS: FENESTRATIONSURFACE:DETAILED ===========
FenestrationSurface:Detailed,
Z1_Par3_Jan1, !- Name
Window, !- Surface Type
Janela, !- Construction Name
Z1_Par3, !- Building Surface Name
, !- Outside Boundary Condition Object
, !- View Factor to Ground
, !- Shading Control Name
, !- Frame and Divider Name
, !- Multiplier
4, !- Number of Vertices
0.050000000000, !- Vertex 1 X-coordinate {m}
0.000000000000, !- Vertex 1 Y-coordinate {m}
2.100000000000, !- Vertex 1 Z-coordinate {m}
0.050000000000, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
0.600000000000, !- Vertex 2 Z-coordinate {m}
3.950000000000, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
0.600000000000, !- Vertex 3 Z-coordinate {m}
3.950000000000, !- Vertex 4 X-coordinate {m}
0.000000000000, !- Vertex 4 Y-coordinate {m}
2.100000000000; !- Vertex 4 Z-coordinate {m}
FenestrationSurface:Detailed,
Z3_Par1_Jan1, !- Name
Window, !- Surface Type
Janela, !- Construction Name
Z3_Par1, !- Building Surface Name
, !- Outside Boundary Condition Object
, !- View Factor to Ground
, !- Shading Control Name
, !- Frame and Divider Name
, !- Multiplier
4, !- Number of Vertices
3.950000000000, !- Vertex 1 X-coordinate {m}
6.000000000000, !- Vertex 1 Y-coordinate {m}
2.100000000000, !- Vertex 1 Z-coordinate {m}
3.950000000000, !- Vertex 2 X-coordinate {m}
6.000000000000, !- Vertex 2 Y-coordinate {m}
0.600000000000, !- Vertex 2 Z-coordinate {m}
0.050000000000, !- Vertex 3 X-coordinate {m}
6.000000000000, !- Vertex 3 Y-coordinate {m}
0.600000000000, !- Vertex 3 Z-coordinate {m}
0.050000000000, !- Vertex 4 X-coordinate {m}
6.000000000000, !- Vertex 4 Y-coordinate {m}
2.100000000000; !- Vertex 4 Z-coordinate {m}
FenestrationSurface:Detailed,
Z1_Par1_Port1, !- Name
Door, !- Surface Type
Porta_Interna, !- Construction Name
Z1_Par1, !- Building Surface Name
Z2_Par3_Port1, !- Outside Boundary Condition Object
, !- View Factor to Ground
, !- Shading Control Name
, !- Frame and Divider Name
, !- Multiplier
4, !- Number of Vertices
2.400000000000, !- Vertex 1 X-coordinate {m}
6.000000000000, !- Vertex 1 Y-coordinate {m}
2.100000000000, !- Vertex 1 Z-coordinate {m}
2.400000000000, !- Vertex 2 X-coordinate {m}
6.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
1.600000000000, !- Vertex 3 X-coordinate {m}
6.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
1.600000000000, !- Vertex 4 X-coordinate {m}
6.000000000000, !- Vertex 4 Y-coordinate {m}
2.100000000000; !- Vertex 4 Z-coordinate {m}
FenestrationSurface:Detailed,
Z2_Par3_Port1, !- Name
Door, !- Surface Type
Porta_Interna, !- Construction Name
Z2_Par3, !- Building Surface Name
Z1_Par1_Port1, !- Outside Boundary Condition Object
, !- View Factor to Ground
, !- Shading Control Name
, !- Frame and Divider Name
, !- Multiplier
4, !- Number of Vertices
1.600000000000, !- Vertex 1 X-coordinate {m}
0.000000000000, !- Vertex 1 Y-coordinate {m}
2.100000000000, !- Vertex 1 Z-coordinate {m}
1.600000000000, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
2.400000000000, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
2.400000000000, !- Vertex 4 X-coordinate {m}
0.000000000000, !- Vertex 4 Y-coordinate {m}
2.100000000000; !- Vertex 4 Z-coordinate {m}
FenestrationSurface:Detailed,
Z2_Par1_Port1, !- Name
Door, !- Surface Type
Porta_Interna, !- Construction Name
Z2_Par1, !- Building Surface Name
Z3_Par3_Port1, !- Outside Boundary Condition Object
, !- View Factor to Ground
, !- Shading Control Name
, !- Frame and Divider Name
, !- Multiplier
4, !- Number of Vertices
2.400000000000, !- Vertex 1 X-coordinate {m}
2.000000000000, !- Vertex 1 Y-coordinate {m}
2.100000000000, !- Vertex 1 Z-coordinate {m}
2.400000000000, !- Vertex 2 X-coordinate {m}
2.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
1.600000000000, !- Vertex 3 X-coordinate {m}
2.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
1.600000000000, !- Vertex 4 X-coordinate {m}
2.000000000000, !- Vertex 4 Y-coordinate {m}
2.100000000000; !- Vertex 4 Z-coordinate {m}
FenestrationSurface:Detailed,
Z3_Par3_Port1, !- Name
Door, !- Surface Type
Porta_Interna, !- Construction Name
Z3_Par3, !- Building Surface Name
Z2_Par1_Port1, !- Outside Boundary Condition Object
, !- View Factor to Ground
, !- Shading Control Name
, !- Frame and Divider Name
, !- Multiplier
4, !- Number of Vertices
1.600000000000, !- Vertex 1 X-coordinate {m}
0.000000000000, !- Vertex 1 Y-coordinate {m}
2.100000000000, !- Vertex 1 Z-coordinate {m}
1.600000000000, !- Vertex 2 X-coordinate {m}
0.000000000000, !- Vertex 2 Y-coordinate {m}
0.000000000000, !- Vertex 2 Z-coordinate {m}
2.400000000000, !- Vertex 3 X-coordinate {m}
0.000000000000, !- Vertex 3 Y-coordinate {m}
0.000000000000, !- Vertex 3 Z-coordinate {m}
2.400000000000, !- Vertex 4 X-coordinate {m}
0.000000000000, !- Vertex 4 Y-coordinate {m}
2.100000000000; !- Vertex 4 Z-coordinate {m}
!- =========== ALL OBJECTS IN CLASS: OUTPUT:VARIABLEDICTIONARY ===========
Output:VariableDictionary,
IDF; !- Key Field
!- =========== ALL OBJECTS IN CLASS: OUTPUT:SURFACES:DRAWING ===========
Output:Surfaces:Drawing,
DXF, !- Report Type
RegularPolyline; !- Report Specifications 1
!- =========== ALL OBJECTS IN CLASS: OUTPUT:TABLE:SUMMARYREPORTS ===========
Output:Table:SummaryReports,
InputVerificationandResultsSummary, !- Report 1 Name
EnvelopeSummary, !- Report 2 Name
ClimaticDataSummary, !- Report 3 Name
AnnualBuildingUtilityPerformanceSummary, !- Report 4 Name
LightingSummary; !- Report 5 Name
!- =========== ALL OBJECTS IN CLASS: OUTPUTCONTROL:TABLE:STYLE ===========
OutputControl:Table:Style,
CommaAndHTML, !- Column Separator
JtoKWH; !- Unit Conversion
!- =========== ALL OBJECTS IN CLASS: OUTPUT:VARIABLE ===========
Output:Variable,
*, !- Key Value
Site Outdoor Air Drybulb Temperature, !- Variable Name
Timestep; !- Reporting Frequency
Output:Variable,
*, !- Key Value
Site Outdoor Air Wetbulb Temperature, !- Variable Name
Timestep; !- Reporting Frequency
Output:Variable,
*, !- Key Value
Site Outdoor Air Dewpoint Temperature, !- Variable Name
Timestep; !- Reporting Frequency
Output:Variable,
*, !- Key Value
Site Solar Azimuth Angle,!- Variable Name
Timestep; !- Reporting Frequency
Output:Variable,
*, !- Key Value
Site Solar Altitude Angle, !- Variable Name
Timestep; !- Reporting Frequency
Output:Variable,
*, !- Key Value
Site Direct Solar Radiation Rate per Area, !- Variable Name
Timestep; !- Reporting Frequency
Output:Variable,
*, !- Key Value
Site Diffuse Solar Radiation Rate per Area, !- Variable Name
Timestep; !- Reporting Frequency
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/simergy-users-onebuilding.org/attachments/20161121/644cea8f/attachment.htm>
More information about the Simergy-users
mailing list