[Simergy-users] How to control temperature

[Tobias Maile]

Hi Jun,

In Simergy this is done via the Zone Conditions template. In that 
template you can define different thermostats, usually a dry bulb 
thermostat is used that defines the setpoint of your space. The default 
value depends on the Zone Conditions template that you select.

Buildings -> Zone Grouping -> Zone Conditions -> Zone Controls -> Thermostat



In this case we show a dual setpoint one for heating and one for cooling.

Tobias

On 3/25/2016 9:51 PM, Jun Hao wrote:
> Dear all:
>
> I have a question about how to control the temperature inside of the 
> building. And what is the default inside building temperature? For 
> example, if the default building temperature is 70, how to change it 
> to 68? Thank you very much!
>
> Bests,
> Jun Hao
>
>
>
>
> _______________________________________________
> Simergy-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/simergy-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to SIMERGY-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/simergy-users-onebuilding.org/attachments/20160407/a09a35f4/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: jdfaefac.png
Type: image/png
Size: 77598 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/simergy-users-onebuilding.org/attachments/20160407/a09a35f4/attachment.png>