[Lustre-discuss] Kernel Panic error after lustre 2.0 installation

[Brian J. Murrell]

On Thu, 2011-02-17 at 23:26 +0330, Arya Mazaheri wrote:
> Hi there,

Hi,

> Unable to access resume device (LABEL=SWAP-sda3)
> mount: could not find filesystem 'dev/root'
> setuproot: moving /dev failed: No such file or directory
> setuproot: error mounting /proc: No such file or directory
> setuproot: error mounting /sys: No such file or directory
> swirchroot: mount failed: No such file or directory
> Kernel Panic - not syncing: Attempted to kill init!
> 
> I have no problem with the original kernel installed by centos. I
> guessed this may be related to RAID controller card driver which may
> not loaded by the patched lustre kernel.

That seems like a reasonable conclusion given the information available.

> so I have added the driver into the initrd.img file.

Where did you get the driver from?  What is the name of the driver?

> But it didn't solve the problem.

Depending on where it came from, yes, it might not.

> Should I install the lustre by building the source?

That may be required, but not necessarily required.  We need more
information.

b.


-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part
URL: <http://lists.lustre.org/pipermail/lustre-discuss-lustre.org/attachments/20110217/64d14c5a/attachment.pgp>