[Ibpsausa] Going to Denver for the BPA conference? Check Out These Great Workshops

[Steven Ayala]

View this email in your browser
<https://mailchi.mp/ibpsa.us/bpa-conference-workshops-3174609857867?e=[UNIQID]>
<http://ibpsa.us/>
Join our sponsors at the 2019 ASHRAE BPAC pre-conference workshops

Sign-up now
<https://www.ashrae.org/login?ReturnURL=https://eweb.ashrae.org/eweb/DynamicPage.aspx?WebCode=EventRegWithCodes&evt_key=c152fd13-044a-48f1-a875-dce0c50a8124>
for
these courses at the 2019 ASHRAE Building Performance Analysis Conference
<https://www.ashrae.org/conferences/topical-conferences/2019-ashrae-building-performance-analysis-conference>,
held September 25- 27, 2019 in Denver, Colorado:

*Load Calculations; HVAC Sizing; Building Energy Modeling; ZNE and
Code-Compliance (Presented by *IES Ltd <https://www.iesve.com/>*.)*

<https://www.iesve.com/>

*Date:* Tuesday, Sept 24
*Start Time: *9 a.m.
*End Time: *5 p.m.
*Presenters: *Liam Buckley <https://www.linkedin.com/in/liamjbuckley>, Matthew
Duffy <https://www.linkedin.com/in/duffymatthewj>
*Price: *$25

*Description:*

This is an interactive workshop using IESVE-2019 Software for:

   - Heating and Cooling Load Calculations (ASHRAE Heat Balance Method);
   - HVAC Equipment Sizing & Sequencing;
   - Building Energy Modeling;
   - Simulation of Renewable Energy & Low-Carbon Technologies;
   - Code-Compliance Modeling for ASHRAE 90.1; with ASHRAE 62.1 & ASHRAE 55
   Integration;
   - Reports, Metrics & Outputs (Loads, Energy, Carbon, Peak Demands & Code
   Compliance)

------------------------------


*Effective simulation throughout the building life cycle with Tas
(presented by *EDSL <http://www.edsltas.com/>*)*

<http://www.edsltas.com/>

*Date:* Tuesday, Sept 24
*Start time*: 9 a.m.
*End Time*: 12 p.m.
*Presenters*: Michael Sawford <https://www.linkedin.com/in/michaelsawford>
 & Robert Yori <https://www.linkedin.com/in/robertyori>
*Price*: $25

*Description:*

With the adoption of ASHRAE 209, designers, engineers, and energy
consultants now have a comprehensive, cogent framework on which to base
their sustainability strategies.  This workshop will demonstrate how Tas
Engineering can be used throughout project phases and design cycles for
analysis, decision making, and visualization.

------------------------------




*TRACE 3D Plus <https://www.trane.com/commercial/north-america/us/en.html>*

*Date:* Tuesday, Sept 24
*Start time*: 1:00 p.m.
*End Time*: 5:00 p.m.
*Presenters*: Sarah Hilden
*Price*: $25


*Description:*

Introduction to TRACE 3D Plus - including newest features coming in Version
2.

In this course you will use TRACE 3D Plus to create a building and
familiarize yourself with the following:

   - Use of Themes and Templates to efficiently input and modify load
   information
   - Geometry and complex roof creation
   - Introduction to Systems and Plants
   - Where to find most common outputs
   - Question and Answer session
   - Users do NOT need to hold a TRACE license and computers will be
   provided for conference use

Register Now for These Workshops
<https://www.ashrae.org/login?ReturnURL=https://eweb.ashrae.org/eweb/DynamicPage.aspx?WebCode=EventRegWithCodes&evt_key=c152fd13-044a-48f1-a875-dce0c50a8124>
Note that the registration page requires users to create an ASHRAE account
first. The workshop sign-up is on the second page of the registration
application.

Separate registration for this course is required. This workshop is not
included with the conference and will not be included in the virtual
conference.
*Copyright © 2019 IBPSA-USA, All rights reserved.*


Want to change how you receive these emails?
You can update your preferences
<https://ibpsa.us3.list-manage.com/profile?u=545ecdecc811a6e412a8810dd&id=0769126d70&e=[UNIQID]>
 or unsubscribe from this list
<https://ibpsa.us3.list-manage.com/unsubscribe?u=545ecdecc811a6e412a8810dd&id=0769126d70&e=[UNIQID]&c=d84b252cc1>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/ibpsausa-onebuilding.org/attachments/20190911/9f014fbb/attachment.html>