[Ibpsausa] Register for March 14 IBPSA event at Syska Hennessy

[Arpan Bakshi]

*You must re-register.*
Even if you already sent an RSVP, please Register for the event again since
IBPSA now has GoToWebinar service. Please register through the GoToWebinar
service, even if you plan on attending in person.


*Register here:*
https://atte <https://attendee.gotowebinar.com/register/9095714687672236544>
ndee.gotowebinar.com/register/9095714687672236544<https://attendee.gotowebinar.com/register/9095714687672236544>


Thank you.


_________________________________________

  *Arpan Bakshi  *Sustainability Manager
LEED AP BD+C, ESTIDAMA PQP

*YR&G*
sustainability consulting, education and analysis
*
161 Bowery - 4th Floor - NY NY 10002
*
D 646.704.2880

yrgxyz.com | facebook<http://www.facebook.com/#%21/pages/YRG-sustainability/109166559111721>
 | twitter <http://twitter.com/#%21/YRGxyz>



On Tue, Feb 26, 2013 at 3:02 PM, Arpan Bakshi <abakshi at yrgxyz.com> wrote:

>
> *IBPSA-USA NEW YORK REGIONAL CHAPTER  **presents*
>
> *EnergyPlus GUI I*
> COMFEN and N++
>
> *
> Location:* Syska Hennessy, 1515 Broadway, New York, NY 10036. Tel.
> 646.276.4494
>
> * Date & Time:* Thursday, March 14, 2013 - 6:00-8:00 PM.
> *
> 6:00-6:30 PM    Networking
> **
> 6:30-7:00 PM    EnergyPlus for Early Design and Single Zone Studies**
> **David Fannon AIA – Senior Associate, Senior High Performance
> Specialist, Syska Hennessy Group, Inc.**
> **
> **7:00-7:15 PM    Q & A
> **
> 7:15-7:45 PM    A demonstration of the latest GUI for EnergyPlus
> **Vladimir Bajic – Senior Energy Engineer and Software Developer,
> Viridian and ExpertApp* *
> **
> **7:45-8:00 PM    Q & A*
>
>
> PLEASE *RSVP *(abakshi at yrgxyz.com) IF YOU ARE PLANNING TO ATTEND.
>
>
> *
> *
>
> Descriptions
>
> *
> *
>
> *
> *
>
> *Presentation 1*
>
> *
> *
>
> *Title:** *EnergyPlus for Early Design and Single Zone Studies; David
> Fannon AIA, Senior Associate, Senior High Performance Specialist, Syska
> Hennessy Group, Inc.****
>
> ** **
>
> *Description:** *This talk focuses on using COMFEN to run simplified
> EnergyPlus models which inform early design-decisions and perform simple
> single-zone studies quickly and relatively inexpensively.  Using examples
> from recent projects, we will discuss ways to use COMFEN both an interface
> for rapid simulation and as a ready-made database that can be manipulated
> outside the GUI for comparative studies.  The presentation concludes with
> some notes on analyzing the results, the limitations of the tool and
> Quality Assurance processes.****
>
> ** **
>
> *About the Speaker:** *David is a New York- based member of Syska
> Hennessy's High Performance Solutions team, with broad perspective and
> experience as a designer, building science researcher and teacher.  His
> expertise lies in integrating research, analysis, and design to provide
> luminous, thermal and acoustic comfort while reducing resource consumption
> in buildings. In the summer of 2011 David traveled to Japan as part of the
> Architecture.Energy.2011 workshop to assist architects rebuilding after the
> natural and nuclear disasters. He spent two years as a student and
> researcher in the Center for the Built Environment at the University of
> California Berkeley, and is currently completing his degree. David holds a
> Bachelor of Architecture degree from Rensselaer Polytechnic Institute and
> is a registered architect in the State of New York.****
>
>
>
> *Presentation 2*
>
> ** **
>
> *Title: *N++: A demonstration of the latest GUI for EnergyPlus; Vladimir
> Bajic – Senior Energy Engineer and Software Developer ****
>
> *
> *
>
> *Description: *N++ is a building energy modeling software created to
> emulate the architectural and engineering design process. As a front
> interface for the highly capable EnergyPlus simulation engine, N++ allows
> the user to input project information into the energy simulation in an
> intuitive, highly visible fashion that simplifies the energy modeling
> process for designers who are new to energy analysis. During the
> presentation Mr. Bajic will demonstrate the construction of an energy model
> in N++, exemplifying the innovative features that simplify the construction
> of complex building geometries, lighting designs and mechanical systems.
> The presentation will also demonstrate the flexible capability of N++ to
> build multiple parametric runs and produce an energy code baseline quickly
> and easily.****
>
> *
> *
>
> *About the Speaker**: *Mr. Bajic is a mechanical engineer with over 16
> years of experience in the HVAC industry as a designer, energy modeler and
> software developer. His experience is both international and domestic.
> Mr.Bajic’s main focus is building software applications that will help
> architects and engineers design more efficient buildings as part of an
> integrated design process. Mr. Bajic is currently a senior energy engineer
> at Viridian Energy & Environmental (a Vidaris company). He is also the
> founder of the ExpertApp (www.expertapp.com), a software company that is
> specialized in creating engineering and architectural cad-based
> applications focused on integrated sustainable design.
>
>
>
>
> _________________________________________
>
>   *Arpan Bakshi  *Sustainability Manager
> LEED AP BD+C, ESTIDAMA PQP
>
> *YR&G*
> sustainability consulting, education and analysis
> *
> 161 Bowery - 4th Floor - NY NY 10002
> *
> D 646.704.2880
>
> yrgxyz.com | facebook<http://www.facebook.com/#%21/pages/YRG-sustainability/109166559111721>
>  | twitter <http://twitter.com/#%21/YRGxyz>
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/ibpsausa-onebuilding.org/attachments/20130307/48fc2e14/attachment.htm>