<div dir="ltr"><div><div>Hi all, <br><br></div>I was wondering if anyone can shed some light on the primary systems that HAP assumes when modeling "Equipment Type - Terminal Units" with "Air System Type - Water source heat pumps" (using the Common Ventilation setup). The part i find confusing is under the "Ventilation System Components" tab when i activate the cooling and heating coils for my make-up air unit. The reason i activate them is because in my cold climate I must minimally condition the outdoor air before bringing it to the terminal unit. However, when i select "Water-cooled DX" for the cooling coil, the only other choice i have for the heating coil is "water source heat pump." If instead I select "air-cooled DX" for the cooling coil, i have much more variety of systems for the heating coil. For the cooling coil, i'm assuming water-cooled DX refers to a split condenser unit that is water-cooled perhaps using a cooling tower(?), but then i don't understand what they mean by water source heat pump for the central heating coil. Can someone help me understand the system setup for the heating and cooling coils when i select water-cooled DX?<br><br></div>Thanks<br></div>