[Hap-users] LEED Baseline system 5

[Paula A Hernández]

Hi, I have received the following comment from the Reviewer :

 



 

Section G3.1.3.12 states: The air temperature for cooling shall be reset
higher by 5ºF under the minimum cooling load conditions.

 

I will be very grateful if you can tell me how to enter this data into HAP
v5.11.

 

Thank you,

 

Paula Hernández

 

 



Ingeniera Paula Andrea Hernández LEED  AP (BD +C) / Edge Expert & Auditor

Capitulo Argentino de ASHRAE 

 

Estudio Ingeniero Mario Pedro Hernández

Cel: 11 1559221377 (+54 9 1159221377)

Tel./Fax: 4302-9561 Tel.: 4303-3481

Av. Montes de Oca 1103 5º D - C.A.B.A.

Web Site:  <http://www.mphingenieria.com.ar/> www.mphingenieria.com.ar

e-mail:  <mailto:mphingenieria at fibertel.com.ar>
paulahernandez4 at fibertel.com.ar

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/hap-users-onebuilding.org/attachments/20221012/ca6973d7/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 61966 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/hap-users-onebuilding.org/attachments/20221012/ca6973d7/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 3723 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/hap-users-onebuilding.org/attachments/20221012/ca6973d7/attachment.jpg>