[Hap-users] FCU Terminal Unit Coil Leaving Temperature

[Joyce Constable via Hap-users]

Hi All,

The following is in reference to HAP 5.0.

There will be multiple Fan Coil Units in the HVAC system, with a common Return Air/Ventilation Air System.
In the FCU unit section, Zone Components, Common Data, I check the Cooling Coil Design Supply Temp at 55°F.
When I run the program, the Coil Leaving  Temps range from 58.3°F db/57.2°F wb to 64.5°F db/63.5°F wb; and Coil Entering Temps 78.4°F db/66.7wb to 79.2°F db/69.3°Fwb
Can Anyone comment on why Hap doesn't calculate the Loads using the 55°F Design Supply Temp?

Any information is greatly appreciated.
Thank you.

Joyce Constable, LEED AP BD+C




- - CONFIDENTIALITY The information in this e-mail and any attachment is confidential. It is intended only for the named recipient(s). If you are not a named recipient please notify the sender immediately and do not disclose the contents to another person or take copies.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/hap-users-onebuilding.org/attachments/20170309/315ff82f/attachment-0001.htm>