[Hap-users] Manipulating HAP

[Trevis Cardinez via Hap-users]

So I got an issue where my cooling load requirement was roughly 12 tons
while my airflow requirement was approx 6600 cfm. When searching for a
packaged unit to serve this purpose, I saw a little problem getting a unit
that's not too large and can satisfy the cfm requirement in particular. So
my attempt now, is to split the room load and ventilation load, hence the
cfm as well, and use two smaller units to meet my requirements. My question
now is how do I model HAP to obtain my room load only? Do I need to take of
the OA requirements in the space itself or I can do something about it in
the system itself?

 

Trevis Cardinez

Mechanical Engineer

Welch, Morris + Associates Ltd.
Athelstane Building,

59 Chacon Street,

San Fernando.

Tel: 1-868-657-0183/657-0582

Fax:1-868-653-2381

Mobile: 1-868-373-4935

Email: engineer2 at welchmorris.com

Website: www.welchmorris.com

 

This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the system manager at
Welch Morris and Associates. This message contains confidential information
and is intended only for the individual named. If you are not the named
addressee you should not disseminate, distribute or copy this e-mail. Please
notify the sender immediately by e-mail if you have received this e-mail by
mistake and delete this e-mail from your system. If you are not the intended
recipient you are notified that disclosing, copying, distributing or taking
any action in reliance on the contents of this information is strictly
prohibited.

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/hap-users-onebuilding.org/attachments/20160908/ceb20de3/attachment-0001.htm>