[Hap-users] HAP report

Trevis Cardinez via Hap-users hap-users at lists.onebuilding.org
Tue Jun 21 06:51:01 PDT 2016


What does the value for the ventilation load of the terminal units on the
air system design page of its report  indicate? The ventilation load I know
is indicated as the cooling coil load so how does HAP attain that value for
their ventilation load?

 

 

Trevis Cardinez

Mechanical Engineer

Welch, Morris + Associates Ltd.

Contact No: 868-657-0183

 

 

This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the system manager at
Welch Morris and Associates. This message contains confidential information
and is intended only for the individual named. If you are not the named
addressee you should not disseminate, distribute or copy this e-mail. Please
notify the sender immediately by e-mail if you have received this e-mail by
mistake and delete this e-mail from your system. If you are not the intended
recipient you are notified that disclosing, copying, distributing or taking
any action in reliance on the contents of this information is strictly
prohibited.

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/hap-users-onebuilding.org/attachments/20160621/4a264305/attachment-0001.htm>


More information about the Hap-users mailing list