[Hap-users] FW: Building obstruction

[Matt Scott via Hap-users]

Re-sending to share with the rest of the group.  I'm curious what others have to say about my approach.

Matt

From: Matt Scott
Sent: Thursday, June 16, 2016 8:47 AM
To: 'EWA engineering' <info at ewa-engineering.com>
Cc: hap-users at lists.onebuilding.org
Subject: RE: [Hap-users] Building obstruction

You could model the shaded walls as partitions instead of walls.  That way there would be no solar load calculated through those surfaces.

Matt

From: Hap-users [mailto:hap-users-bounces at lists.onebuilding.org] On Behalf Of EWA engineering via Hap-users
Sent: Thursday, June 16, 2016 5:22 AM
To: hap-users at lists.onebuilding.org<mailto:hap-users at lists.onebuilding.org>
Subject: [Hap-users] Building obstruction

Dear all,
I have to calculate the peak load for a room located on the ground floor of a building in a narrow street.
How can I take into account the shading from the buildings located on the other side of the street ?

Best regards.

ir. Frédéric Oleksandrow
www.ewa-engineering.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/hap-users-onebuilding.org/attachments/20160616/97b398d2/attachment-0002.htm>