[Hap-users] fresh air calculation

[Aaron Smith]

‎Hello,

For the system, under the General tab choose ‎terminal units, 2-pipe fan coil (if they are cooling only) then choose common ventilation system. In the System components tab, you can describe the AHU - Central cooling, supply and return fans, etc.  Then input the fan-coil unit description under the Zone components tab.

Aaron

Aaron Smith, P.Eng
M&R Engineering Ltd.

Sent from my BlackBerry 10 smartphone on the TELUS network.
  Original Message  

Date: Sat, 22 Feb 2014 12:16:38 +0300
From: Mohamed Gasser <gasser79 at hotmail.com>
To: "hap-users at lists.onebuilding.org"
<hap-users at lists.onebuilding.org>
Subject: [Hap-users] fresh air calculation
Message-ID: <DUB127-W19847C360C0024C9DDE63CD0840 at phx.gbl>
Content-Type: text/plain; charset="windows-1256"

I have provide a load calculation for a building which is supposed to have a chiller plant to provide cooling through a fan coil unit and an AHU system to provide just fresh air(outdoor air ventilation) through diffusers. some amount of chilled water will be supplied to the AHU to have the outdoor air treated. I have been using carrier HAP and my challenge is how to go about the system properties i.e equipment type and air system type.



thanks,

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/hap-users-onebuilding.org/attachments/20140222/5258d330/attachment.html>

------------------------------

_______________________________________________
Hap-users mailing list
Hap-users at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/hap-users-onebuilding.org


End of Hap-users Digest, Vol 47, Issue 2
***************************************
*