[Hap-users] LEED System type 5: Supply Air Temp Reset

[Matthew Scott]

For LEED baseline system type 5, the Supply Air Temperature for cooling
"shall be reset higher by 5 degrees F under the minimum cooling load
conditions."

 

I take this to mean under Capacity Control, I should select "Temp Reset
by Greatest Zone Demand" and set the Max Supply Temperature to 60
degrees since I have the Supply Temp set to 55 degrees. Reading the Help
description on this setting makes me think otherwise, but there doesn't
appear to be a better option.

 

I've attached a screen shot of the cooling settings:

 

 

 

Perhaps the tech team could post a guide on how to properly execute all
of the LEED / Appendix G requirements for each system type in HAP. 

 

Thanks for your help!

 

Matt Scott

N.E. Fisher & Associates, Inc.

329 East Second St, 2nd Flr

Boyertown, PA 19512

e: mscott at nefisher.com

p: 610-369-3190

f: 610-369-3194

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/hap-users-onebuilding.org/attachments/20121105/e5bc3fba/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 207749 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/hap-users-onebuilding.org/attachments/20121105/e5bc3fba/attachment-0001.png>