[Hap-users] Editing HAP Library

[Dusko Nikolic]

You can't do that but what you can do is to import wall constructions 
from existing projects. You might want to define all the wall 
constructions that you use in a "dummy" project and then when you need 
them you can import them from there



On 10.08.2012 12:53, ELIE AYOUB wrote:
>
> Dear HAP-users,
>
> Does anyone have a clue how to create walls With specific U-values and 
> layers and store them in the HAP library so whenever I want to use it 
> in a new/different projects, I can find it in the "Wall Assembly Name" 
> without recreating new one.
>
> Thank you in advance & Best Regards
>
> *Elie Ayoub**
> *Assistant Project Engineer
>
> OPUS consulting engineers -- Mechanical Department
> www.opus-engineering.com <mailto:zhaddad at opus-engineering.com>
>
> +961 / T: (0)1 381360 - F: (0)1 381356
>
> (Corporate Member of the Lebanon Green Building Council)
>
> http://www.docbert.org/blog/pics/P-Webding.pngPlease consider the 
> environment before printing this email
>
>
>
> _______________________________________________
> Hap-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/hap-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to HAP-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/hap-users-onebuilding.org/attachments/20120810/567edaff/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 1117 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/hap-users-onebuilding.org/attachments/20120810/567edaff/attachment-0002.png>