<div dir="ltr">Hi everyone,<div><br></div><div>I'm curious how people model fan power when the only information provided is rated motor HP. </div><div><br></div><div>I often see a mechanical schedule that lists the same motor HP for different units (i.e. have varying airflows); this often applies to smaller fan coils that have fractional motor HP ratings. I've tended to model these systems based on a Watts per cfm (W/cfm) basis (using estimated total static pressure and efficiency) rather than the rated motor HP, so that a fan with half the airflow would draw half the fan power.</div><div><br></div><div>I've also noticed that a calculation of power using amps x volts (say for a single phase) often will indicate a higher total Watts than the rated motor HP. </div><div><br></div><div>Does anyone have any insight into the relationship between actual fan power draw and rated motor HP in real life applications (is there a correlation or is it uttery dependent on parameters such as static pressure, impeller efficiency, motor efficiency, etc.)? Is there a preferred way to model fan power where only rated HP is provided?<br></div><div><br></div><div>Thanks,</div><div>Chris</div></div>